MXR MB301 Bass Synthesizer Pedal






Overview
Turn your bass into a filthy funk machine with the MXR Bass Synth. It serves up intergalactic grooves and vintage analog-style vibes with a range of monophonic synth tones that call back to hits from Stevie Wonder, Michael Jackson, Parliament Funkadelic, and more. Designed with low-end professor and tone connoisseur Ian Martin Allison, this powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain.
- Designed in collaboration with Ian Martin Allison
- Thunderous sub-octave, expressive envelope, and lush modulation effects
- Killer tracking and sustain
- Eight different presets to plug you straight into the groove
- Three different waveforms, additional oscillators, tap and expression control, and more
Funk it up
Dig into your groove with a full, player-friendly suite of controls to shape every detail of your bass synth tone. The Sub Mix knob sets how much of the sub octave is blended with the main synth signal so that you can go as fat and low as you want. The Mod knob brings shimmering liquid tones, from subtle, musical motion to bold, mind-bending pulses--while the Envelope knob sets the filter response from rubber band bounce to slow, syrupy sweeps. Mix, Cutoff, and Resonance knobs help you dial in the perfect tone and feel for your setup--blend dry and wet signals, set filter cutoff… read more frequency, and boost that frequency for extra punch.
Finally, the Voice button adds additional harmonically tuned oscillators for more complex tones while the Shape button selects your preferred waveform: smooth and subtle triangle, rich and aggressive sawtooth, or fat and punchy square.
Pre-funk
If you want to skip the set up and get right down to it, then we have eight different presets designed by Ian Martin Allison to plug you straight into the groove. Each is inspired by classic synth tones, from those heard on Michael Jackson's "Thriller" and Herbie Hancock's "Chameleon" to Peter Gabriel's "Sledgehammer" and Nine Inch Nails' "Head Like a Hole." Cycling through them is as simple as pressing the Preset button.
Dig Deeper
For the true bottomologists out there, the MXR Bass Synth features a number of additional parameters, from oscillator and modulation mix to compression and tracking style. You can also run the pedal in stereo output mode, use an off-board switch such as the MXR Split + Tap or Tap Tempo Switch to cycle presets, use a Volume (X)(TM) Series Pedal to blend setting configurations, and more.
Go forth and get nasty
Whether you're replicating pop hits in a cover band, holding down the low end at church, or touring the world, this pedal gives you instant synth bass magic. Get down on the one with the MXR Bass Synth.
read less
Features:
- Intergalactic grooves and vintage analog-style vibes reminiscent of your favorite funk hits- Designed in collaboration with Ian Martin Allison
- Thunderous sub-octave, expressive envelope, and lush modulation effects
- Killer tracking and sustain
- Eight different presets to plug you straight into the groove
- Three different waveforms, additional oscillators, tap and expression control, and more
Funk it up
Dig into your groove with a full, player-friendly suite of controls to shape every detail of your bass synth tone. The Sub Mix knob sets how much of the sub octave is blended with the main synth signal so that you can go as fat and low as you want. The Mod knob brings shimmering liquid tones, from subtle, musical motion to bold, mind-bending pulses--while the Envelope knob sets the filter response from rubber band bounce to slow, syrupy sweeps. Mix, Cutoff, and Resonance knobs help you dial in the perfect tone and feel for your setup--blend dry and wet signals, set filter cutoff… read more frequency, and boost that frequency for extra punch.
Finally, the Voice button adds additional harmonically tuned oscillators for more complex tones while the Shape button selects your preferred waveform: smooth and subtle triangle, rich and aggressive sawtooth, or fat and punchy square.
Pre-funk
If you want to skip the set up and get right down to it, then we have eight different presets designed by Ian Martin Allison to plug you straight into the groove. Each is inspired by classic synth tones, from those heard on Michael Jackson's "Thriller" and Herbie Hancock's "Chameleon" to Peter Gabriel's "Sledgehammer" and Nine Inch Nails' "Head Like a Hole." Cycling through them is as simple as pressing the Preset button.
Dig Deeper
For the true bottomologists out there, the MXR Bass Synth features a number of additional parameters, from oscillator and modulation mix to compression and tracking style. You can also run the pedal in stereo output mode, use an off-board switch such as the MXR Split + Tap or Tap Tempo Switch to cycle presets, use a Volume (X)(TM) Series Pedal to blend setting configurations, and more.
Go forth and get nasty
Whether you're replicating pop hits in a cover band, holding down the low end at church, or touring the world, this pedal gives you instant synth bass magic. Get down on the one with the MXR Bass Synth.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.89 lbs
- Shipping Dimensions: 6 x 5 x 3 in
- Manufacturer Part Number (MPN): MB301
New
$269.99
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.