MXL 770 Large-Diaphragm Condenser Microphone Complete Bundle

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
MXL 770 Large-Diaphragm Condenser Microphone Complete Bundle, Action Position Back
MXL 770 Large-Diaphragm Condenser Microphone Complete Bundle, Action Position Back
zZounds Gear Experts Say...
This budget-friendly bundle gives you an MXL 770 large-diaphragm condenser microphone, SMP-1 integrated metal pop filter/shockmount, and a 20-foot XLR cable.

The MXL 770 Complete Bundle is centered around the popular MXL 770, a high-quality multipurpose condenser mic that vocalists gravitate to for its solid low frequency response and clear high end. To achieve this, MXL uses a high-quality FET pre-amp and transformer-less balanced output for wide dynamic range and low noise. Features include a low frequency roll-off switch to reduce unwanted rumbling and a -10dB pad to accommodate a wide variety of sound sources. The MXL 770 comes with the SMP-1 integrated metal pop filter/shockmount, and a 20' balanced XLR cable. The MXL 770 Complete Bundle offers the perfect combination of quality, flexibility, and value for both professional and home recording studios.

Features:

- Multipurpose condenser microphone
- Low frequency roll-off to reduce unwanted rumble
- Warm sound with extra clarity at the top end
- Low noise FET preamp with balanced, transformerless output
- Includes custom SMP-1 integrated pop filter/shockmount and 20-ft. balanced XLR cable

- Type: Pressure gradient condenser microphone
- Diaphragm: 6 micron gold-sputtered
- Capsule Size: 22mm/.87 in.
- Frequency Response: 30Hz - 20kHz
- Polar pattern: Cardioid
- Sensitivity: 15mV/Pa
- Output Impedance: 150 ohms
- Pre-Attenuation Switch: 0 dB, -10 dB
- High Pass Filter: 6 dB/octave @ 150Hz
- Equivalent noise: 20 dB (A-weighted IEC 268-4)
- S/N Ratio: 74 dB (Ref. 1 Pa A-weighted)
- Max SPL for .5% THD: 137 dB
- Power Requirements: 48V phantom power (+/- 4V)
- Size: 59mm x 158mm/2.32 in. x 6.22 in.
- Weight: 1 lb/453.59g
- Metal Finish: Black with black grill

For support or warranty questions, please contact the manufacturer:
Phone: 800-800-6608
Web: https://mxlmics.com/support/

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer