Marshall Electronics Pro Pac Plus Microphone Package with Case
No longer available at zZounds



zZounds Gear Experts Say...
MXL 2003, MXL 603S, shock mounts, cables, windscreens, and case
Overview
The Marshall MXL Pro Pac Plus was developed with the professional and working musician in mind. It is perfect for recording music and vocals into digital or analog recording devices. The combination of two highly respected studio condenser microphones one for vocals, one for instruments, is perfect for working in recording studio and home music recording applications.
The Pro Pac Plus consists of:
2003 Condenser microphone with clip
603S Instrument condenser microphone
MXL 56 Shock mount
MXL41-603 Shock mount
(2) MXL, 15 ft. mic cables
(2) Microphone windscreens
MXL 2003
The MXL 2003 is intended for the most critical recording applications, such as acoustic guitar, where tremendous clarity, presence, and detail is required. A three position switch provides Bass cut and a -10dB pad for additional recording options. A transformerless FET preamp offers the engineer a smooth, even response. Its 3-micron gold-sputtered diaphragm reveals incredible transparency and warmth, until now, found only in the world's most expensive mics. The MXL 2003 comes complete with a high isolation shock mount (MXL 56) that allows precision recording without the interference of outside vibrations.
Features
27mm (1 in.) Large Capsule Condenser
Gold-sputtered, 3 micron, low distortion diaphragm
FET preamp with balanced transformer output
Marshall MXL603S
The MXL 603S shares the characteristics of European and Japanese imports at a fraction of their price. Its transformerless design provides… read more a solid bottom and an extremely open top end sound. The 603S is internally wired with World-renowned Mogami Cable for sonic integrity. The 603S is very well suited for most instrument miking and is very rugged for use on the road.
Features
20mm gold-sputtered, 6 micron gold diaphragm
Satin silver finish with etched engravings read less
The Pro Pac Plus consists of:
2003 Condenser microphone with clip
603S Instrument condenser microphone
MXL 56 Shock mount
MXL41-603 Shock mount
(2) MXL, 15 ft. mic cables
(2) Microphone windscreens
MXL 2003
The MXL 2003 is intended for the most critical recording applications, such as acoustic guitar, where tremendous clarity, presence, and detail is required. A three position switch provides Bass cut and a -10dB pad for additional recording options. A transformerless FET preamp offers the engineer a smooth, even response. Its 3-micron gold-sputtered diaphragm reveals incredible transparency and warmth, until now, found only in the world's most expensive mics. The MXL 2003 comes complete with a high isolation shock mount (MXL 56) that allows precision recording without the interference of outside vibrations.
Features
27mm (1 in.) Large Capsule Condenser
Gold-sputtered, 3 micron, low distortion diaphragm
FET preamp with balanced transformer output
Marshall MXL603S
The MXL 603S shares the characteristics of European and Japanese imports at a fraction of their price. Its transformerless design provides… read more a solid bottom and an extremely open top end sound. The 603S is internally wired with World-renowned Mogami Cable for sonic integrity. The 603S is very well suited for most instrument miking and is very rugged for use on the road.
Features
20mm gold-sputtered, 6 micron gold diaphragm
Satin silver finish with etched engravings read less
Specs
MXL 2003
Type: Condenser pressure gradient mic with large 27mm diaphragm capsule
Frequency Range: 20Hz-23kHz
Polar Pattern: Cardioid
Sensitivity: 16mV/Pa
Impedance: 150W
S/N Ratio: 76dB (Ref. 1Pa A-weighted)
Equivalent Noise Level: 18dB(A weighted IEC 268-4)
Max SPL for 0.5% THD: 130dB
Power Requirements: Phantom Power 48V ±5V
Current Consumption: <2.5mA
Size: 55mm × 195mm
Weight: 1.3lb
Metal Finish: Black
Marshall MXL603S
Type: Condenser pressure gradient mic with large 20mm diaphragm capsule
Frequency Range: 20Hz-25kHz
Polar Pattern: Subcardioid (Wide Cardioid)
Impedance: 200W
Equivalent Noise Level: 17dB(A weighted IEC 268-4)
Max SPL for 0.5% THD: 137dB
Power Requirements: Phantom Power 48V ±4V
Current Consumption: <3.0mA
Size: 22mm × 134mm
Weight: 128g
Metal Finish: Silver
Type: Condenser pressure gradient mic with large 27mm diaphragm capsule
Frequency Range: 20Hz-23kHz
Polar Pattern: Cardioid
Sensitivity: 16mV/Pa
Impedance: 150W
S/N Ratio: 76dB (Ref. 1Pa A-weighted)
Equivalent Noise Level: 18dB(A weighted IEC 268-4)
Max SPL for 0.5% THD: 130dB
Power Requirements: Phantom Power 48V ±5V
Current Consumption: <2.5mA
Size: 55mm × 195mm
Weight: 1.3lb
Metal Finish: Black
Marshall MXL603S
Type: Condenser pressure gradient mic with large 20mm diaphragm capsule
Frequency Range: 20Hz-25kHz
Polar Pattern: Subcardioid (Wide Cardioid)
Impedance: 200W
Equivalent Noise Level: 17dB(A weighted IEC 268-4)
Max SPL for 0.5% THD: 137dB
Power Requirements: Phantom Power 48V ±4V
Current Consumption: <3.0mA
Size: 22mm × 134mm
Weight: 128g
Metal Finish: Silver
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-800-6608
Web: https://mxlmics.com/support/
Phone: 800-800-6608
Web: https://mxlmics.com/support/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.