MOTU 828 28x32 USB-C Audio Interface
zZounds Gear Experts Say...
The 828 interface returns in a USB-C model! With 28x32 simultaneous I/O (including 2 mic pres) and MOTU's pristine 192 kHz converters, it's a studio beast.
Overview
The MOTU 828 28x32 USB3 audio interface specializes in audio performance and superb analog audio quality, featuring renowned ESS Sabre32 DAC technology. It delivers a 125 dB dynamic range and extremely low harmonic distortion. Analog performance is driven by decades of engineering expertise in audio interface technology.
USB-C: Universal connectivity for Mac, PC and iOS
Connect to your Mac, PC or iOS device with 5 Gbps USB 3 (compatible with USB 2), with up to 60 audio channels (28 in and 32 out). Class-compliant firmware means you can plug-and-play with Mac or iOS hosts, no driver needed. Industry standard high-performance drivers work with any audio apps. Connect directly to your iPad via USB-C or a standard camera connection kit (Lightning adapter).
Connectivity: 60 simultaneous audio channels
Connect all your studio gear, including microphones, guitars, synths, keyboards, drum machines, outboard processors, MIDI gear, optical expanders -- even a foot pedal. All 28 inputs and 32 outputs are available simultaneously.
High Performance Driver: Ultra-low latency performance
Optimized drivers for both Mac and PC deliver renowned, ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 828 delivers an astonishing round trip latency (RTL) of ~2 ms (milliseconds) over USB (2 or 3) at 96 kHz with a 32-sample host buffer.
Mic Inputs: Transparent mic channels and hi-Z guitar inputs
Capture your recorded material in its truest, most natural form with… read more -113 dB THD+N, 115 dB dynamic range and -129 dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and remote control from your computer or iOS device. Each combo jack alternately provides a 1/4-inch high-impedance TS guitar input for DI tracking and re-amping.
Hi-Z Guitar Inputs: DIY guitar re-amping
DI your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic'd up amp simultaneously. Then re-amp the dry signal later with different amps and cabs -- or amp modeling plug-ins -- to experiment with different tones. No need to re-plug cables between recording and re-amping.
Channel 1-2 Sends/Returns: Extra line inputs when you need them
Do you work with compressors and other outboard gear? Each 828 mic input offers a dedicated analog send/return loop, allowing for both mono or stereo mic channel outboard processing. If nothing is plugged in to a mic input, its return serves as an extra line input with identical signal characteristics to all other line inputs.
Monitor Group: Control up to ten analog outputs
Control your 5.1 or 7.1 surround speaker system with a single fader. The Monitor Group gives you the flexibility to choose any analog outputs you wish to control.
Control Room: A/B speaker select and talkback
Take control of your recording sessions with the front-panel talkback switch. Connect two sets of monitors and check your mixes instantly with front-panel A/B select buttons.
CueMix(TM) 5: Monitor Mixing with Effects
CueMix 5 for Mac, Windows and iOS gives you simple, yet comprehensive graphic control over your mix with attractive graphic mixing, graphic editing of parametric EQ, and a convenient touch-friendly interface (on iOS) for quick access to all mixing features, digitally controlled trims and other settings.
Wireless Control: CueMix 5 for iOS
Control all settings and mixing from your USB host or from an iPhone or iPad running the CueMix 5 app. You can even use multiple iOS devices simultaneously. Set a password for your 828 for network security.
Loopback and live streaming
With 828 loopback channels, you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.
Optical I/O and optical expansion
Two optical banks provide 16 channels of ADAT optical at 48 kHz, 8 channels of S/MUX optical I/O at 96 kHz, with optional stereo TOSLink at rates up to 96kHz. Expand your 828 with other gear, or use it as an optical expander.
S/PDIF digital I/O
The 828's standard RCA S/PDIF input and output make stereo digital transfers a snap, with optional external clocking and support for sample rates up to 96 kHz. Choose any source signal for the S/PDIF output.
MIDI I/O with MIDI Thru
Connect MIDI gear without the need for a separate MIDI interface. MIDI Thru mode lets you loop MIDI directly from IN to OUT, bypassing the computer (or with no computer connected).
Foot switch input
Connect a standard foot pedal switch (sold separately) for hands-free punch-in while recording. Or map the pedal to any keystroke function in your host software.
DC-coupled TRS outputs
All analog outputs are DC-coupled. This means you can use the 828 to manipulate and sequence modular synthesizers from a host DAW using control voltage (CV).
Two headphone outputs
Each headphone output can be programmed with the same or different mixes, with independent volume control from the front-panel or CueMix 5.
Balanced analog
The 828's balanced I/O connections are well-protected against RF interference, AC hum, and other noise-producing environmental factors.
Meter Views
Not using the optical I/O? Or any digital I/O? The 828 provides customized meter views for analog I/O only, digital I/O only and other combinations to best support your workflow.
Start making music right away
Connect the 828 to your Mac or PC and start laying down tracks with the included Performer Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters.
Performer Lite
Performer Lite provides everything you need to record, edit, mix, process and master your own music tracks quickly and easily. Plug in your mic, guitar and MIDI keyboard and start tracking with over 100 virtual instruments, dozens of effects plug-ins, guitar FX processing and much more.
100+ Instruments
Performer Lite includes over 100 virtual instruments, including acoustic and electric pianos, guitars, basses, drums, organs synths, orchestral instruments, choirs, world instruments and much more. Take your musical muse wherever it wants to go.
6 GB of free loops and sample packs
Performer Lite includes 6 GB of free loops and sample packs from leading sample content providers to help you start making music right away. From Performer Lite's Content Browser, choose from dozens of musical styles, click to audition, then drag and drop in your projects timeline to build your track quick.
Since 1986, Big Fish Audio has consistently produced the highest quality sample libraries available. Over the years, their sounds have been featured in hundreds of charting songs and top film and television soundtracks.
Lucidsamples is a collective of experienced music producers and professional musicians that offers high quality samples and sample packs which are suitable for creating products in the most popular music genres. Their sounds are being used all over the world by many well known DJs, music producers and companies.
Loopmasters is the definitive "sample boutique." Based in Brighton, England, this label has been providing pristine audio libraries for more than a decade. Content has been expansive and evolving over the years, with hundreds upon hundreds of royalty-free packs to inspire amateurs and seasoned artists alike.
- 3.9-inch 24-bit RGB LCD with precision metering for all I/O
- Superb analog audio performance driven by ESS Sabre32 Ultra(TM) DAC Technology
- Ultra-low latency and proven, high-performance MOTU drivers (~2 ms RTL with a 32 sample buffer @ 96 kHz)
- Universal connectivity with 5 Gbps USB3 (compatible with USB2)
- 60 simultaneous audio channels (28 inputs and 32 outputs)
- 2x high-performance mic/line/hi-Z guitar inputs on combo XLR/TRS
- Individual preamp gain, 48V phantom power, -20 dB pad, phase invert, remote control, and dedicated inserts for each mic input
- Measured -114 dB THD+N, 118 dB dynamic range and -129 dBu EIN on mic inputs
- Flexible insert returns can operate as extra line inputs (when mic inputs are unused)
- DSP-driven 24-input digital mixer with 8 stereo busses and DSP effects (reverb, 4-band EQ, gate & compressor)
- Wi-Fi control from CueMix 5 app on multiple mobile devices (via a USB-connected computer on the same network)
- Network management features (discovery for multiple devices on the network and password protection for each device)
- Precision boost for all analog inputs and trim for all analog outputs in 1 dB increments
- Control room features include Talkback and A/B monitor select via CueMix 5 software or front panel controls
- Two flexible headphone outputs with independent volume control and fully customizable independent mixes
- 2x balanced XLR main outs
- 8x balanced, DC-coupled 1/4-inch TRS analog outputs with measured 125 dB dynamic range
- Hardware (direct) monitor mixing for each analog output pair and both headphones (8 mix busses)
- 8x balanced 1/4-inch TRS analog inputs with measured 120 dB dynamic range
- 2x banks of optical digital I/O (16 ADAT channels at 1x sample rates) with optional stereo TOSLink on Bank A
- 1x RCA S/PDIF stereo digital I/O
- MIDI in/out/thru
- Word clock in/out/thru
- Foot switch input for hands-free punch-in recording or other programmable host computer keystrokes
- DC-coupled TRS outputs can be used to control modular synthesizers from a host DAW using control voltage (CV)
- Support for 44.1 to 192 kHz sample rates
- 1-rack U form factor built with rugged steel construction
- USB audio class compliant for plug-and-play operation on macOS and iOS (no driver required)
- Driver loopback for mixing host software output with live 828 inputs for streaming and podcasting
- Guitar re-amping with near-zero loop-thru to record the dry guitar signal and mic'd amp simultaneously
- CueMix 5 app to control mixing and settings from your Mac, PC or iOS device
- MOTU Performer Lite and Ableton Live Lite workstation software included
- 100+ instruments (in Performer Lite)
- Over 6 GB of included free loops, samples and one-shots from industry leading libraries
- Two-year warranty
read less
USB-C: Universal connectivity for Mac, PC and iOS
Connect to your Mac, PC or iOS device with 5 Gbps USB 3 (compatible with USB 2), with up to 60 audio channels (28 in and 32 out). Class-compliant firmware means you can plug-and-play with Mac or iOS hosts, no driver needed. Industry standard high-performance drivers work with any audio apps. Connect directly to your iPad via USB-C or a standard camera connection kit (Lightning adapter).
Connectivity: 60 simultaneous audio channels
Connect all your studio gear, including microphones, guitars, synths, keyboards, drum machines, outboard processors, MIDI gear, optical expanders -- even a foot pedal. All 28 inputs and 32 outputs are available simultaneously.
High Performance Driver: Ultra-low latency performance
Optimized drivers for both Mac and PC deliver renowned, ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 828 delivers an astonishing round trip latency (RTL) of ~2 ms (milliseconds) over USB (2 or 3) at 96 kHz with a 32-sample host buffer.
Mic Inputs: Transparent mic channels and hi-Z guitar inputs
Capture your recorded material in its truest, most natural form with… read more -113 dB THD+N, 115 dB dynamic range and -129 dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and remote control from your computer or iOS device. Each combo jack alternately provides a 1/4-inch high-impedance TS guitar input for DI tracking and re-amping.
Hi-Z Guitar Inputs: DIY guitar re-amping
DI your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic'd up amp simultaneously. Then re-amp the dry signal later with different amps and cabs -- or amp modeling plug-ins -- to experiment with different tones. No need to re-plug cables between recording and re-amping.
Channel 1-2 Sends/Returns: Extra line inputs when you need them
Do you work with compressors and other outboard gear? Each 828 mic input offers a dedicated analog send/return loop, allowing for both mono or stereo mic channel outboard processing. If nothing is plugged in to a mic input, its return serves as an extra line input with identical signal characteristics to all other line inputs.
Monitor Group: Control up to ten analog outputs
Control your 5.1 or 7.1 surround speaker system with a single fader. The Monitor Group gives you the flexibility to choose any analog outputs you wish to control.
Control Room: A/B speaker select and talkback
Take control of your recording sessions with the front-panel talkback switch. Connect two sets of monitors and check your mixes instantly with front-panel A/B select buttons.
CueMix(TM) 5: Monitor Mixing with Effects
CueMix 5 for Mac, Windows and iOS gives you simple, yet comprehensive graphic control over your mix with attractive graphic mixing, graphic editing of parametric EQ, and a convenient touch-friendly interface (on iOS) for quick access to all mixing features, digitally controlled trims and other settings.
Wireless Control: CueMix 5 for iOS
Control all settings and mixing from your USB host or from an iPhone or iPad running the CueMix 5 app. You can even use multiple iOS devices simultaneously. Set a password for your 828 for network security.
Loopback and live streaming
With 828 loopback channels, you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.
Optical I/O and optical expansion
Two optical banks provide 16 channels of ADAT optical at 48 kHz, 8 channels of S/MUX optical I/O at 96 kHz, with optional stereo TOSLink at rates up to 96kHz. Expand your 828 with other gear, or use it as an optical expander.
S/PDIF digital I/O
The 828's standard RCA S/PDIF input and output make stereo digital transfers a snap, with optional external clocking and support for sample rates up to 96 kHz. Choose any source signal for the S/PDIF output.
MIDI I/O with MIDI Thru
Connect MIDI gear without the need for a separate MIDI interface. MIDI Thru mode lets you loop MIDI directly from IN to OUT, bypassing the computer (or with no computer connected).
Foot switch input
Connect a standard foot pedal switch (sold separately) for hands-free punch-in while recording. Or map the pedal to any keystroke function in your host software.
DC-coupled TRS outputs
All analog outputs are DC-coupled. This means you can use the 828 to manipulate and sequence modular synthesizers from a host DAW using control voltage (CV).
Two headphone outputs
Each headphone output can be programmed with the same or different mixes, with independent volume control from the front-panel or CueMix 5.
Balanced analog
The 828's balanced I/O connections are well-protected against RF interference, AC hum, and other noise-producing environmental factors.
Meter Views
Not using the optical I/O? Or any digital I/O? The 828 provides customized meter views for analog I/O only, digital I/O only and other combinations to best support your workflow.
Start making music right away
Connect the 828 to your Mac or PC and start laying down tracks with the included Performer Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters.
Performer Lite
Performer Lite provides everything you need to record, edit, mix, process and master your own music tracks quickly and easily. Plug in your mic, guitar and MIDI keyboard and start tracking with over 100 virtual instruments, dozens of effects plug-ins, guitar FX processing and much more.
100+ Instruments
Performer Lite includes over 100 virtual instruments, including acoustic and electric pianos, guitars, basses, drums, organs synths, orchestral instruments, choirs, world instruments and much more. Take your musical muse wherever it wants to go.
6 GB of free loops and sample packs
Performer Lite includes 6 GB of free loops and sample packs from leading sample content providers to help you start making music right away. From Performer Lite's Content Browser, choose from dozens of musical styles, click to audition, then drag and drop in your projects timeline to build your track quick.
Since 1986, Big Fish Audio has consistently produced the highest quality sample libraries available. Over the years, their sounds have been featured in hundreds of charting songs and top film and television soundtracks.
Lucidsamples is a collective of experienced music producers and professional musicians that offers high quality samples and sample packs which are suitable for creating products in the most popular music genres. Their sounds are being used all over the world by many well known DJs, music producers and companies.
Loopmasters is the definitive "sample boutique." Based in Brighton, England, this label has been providing pristine audio libraries for more than a decade. Content has been expansive and evolving over the years, with hundreds upon hundreds of royalty-free packs to inspire amateurs and seasoned artists alike.
Features:
- Next-gen 28 x 32 USB3 audio interface with DSP, mixing and effects- 3.9-inch 24-bit RGB LCD with precision metering for all I/O
- Superb analog audio performance driven by ESS Sabre32 Ultra(TM) DAC Technology
- Ultra-low latency and proven, high-performance MOTU drivers (~2 ms RTL with a 32 sample buffer @ 96 kHz)
- Universal connectivity with 5 Gbps USB3 (compatible with USB2)
- 60 simultaneous audio channels (28 inputs and 32 outputs)
- 2x high-performance mic/line/hi-Z guitar inputs on combo XLR/TRS
- Individual preamp gain, 48V phantom power, -20 dB pad, phase invert, remote control, and dedicated inserts for each mic input
- Measured -114 dB THD+N, 118 dB dynamic range and -129 dBu EIN on mic inputs
- Flexible insert returns can operate as extra line inputs (when mic inputs are unused)
- DSP-driven 24-input digital mixer with 8 stereo busses and DSP effects (reverb, 4-band EQ, gate & compressor)
- Wi-Fi control from CueMix 5 app on multiple mobile devices (via a USB-connected computer on the same network)
- Network management features (discovery for multiple devices on the network and password protection for each device)
- Precision boost for all analog inputs and trim for all analog outputs in 1 dB increments
- Control room features include Talkback and A/B monitor select via CueMix 5 software or front panel controls
- Two flexible headphone outputs with independent volume control and fully customizable independent mixes
- 2x balanced XLR main outs
- 8x balanced, DC-coupled 1/4-inch TRS analog outputs with measured 125 dB dynamic range
- Hardware (direct) monitor mixing for each analog output pair and both headphones (8 mix busses)
- 8x balanced 1/4-inch TRS analog inputs with measured 120 dB dynamic range
- 2x banks of optical digital I/O (16 ADAT channels at 1x sample rates) with optional stereo TOSLink on Bank A
- 1x RCA S/PDIF stereo digital I/O
- MIDI in/out/thru
- Word clock in/out/thru
- Foot switch input for hands-free punch-in recording or other programmable host computer keystrokes
- DC-coupled TRS outputs can be used to control modular synthesizers from a host DAW using control voltage (CV)
- Support for 44.1 to 192 kHz sample rates
- 1-rack U form factor built with rugged steel construction
- USB audio class compliant for plug-and-play operation on macOS and iOS (no driver required)
- Driver loopback for mixing host software output with live 828 inputs for streaming and podcasting
- Guitar re-amping with near-zero loop-thru to record the dry guitar signal and mic'd amp simultaneously
- CueMix 5 app to control mixing and settings from your Mac, PC or iOS device
- MOTU Performer Lite and Ableton Live Lite workstation software included
- 100+ instruments (in Performer Lite)
- Over 6 GB of included free loops, samples and one-shots from industry leading libraries
- Two-year warranty
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
- Mic/line/instr inputs:
- 2 x XLR/TRS "combo" jacks
- Individual -20 dB pad and 48V phantom power
- Preamp gain: +74 dB in 1 dB increments
- 1 MOhm impedance on the line/instr inputs
- Analog inputs:
- 8 x 1/4-inch TRS line in (balanced/unbalanced)
- 2 x 1/4-inch insert returns function as TRS line inputs (with no mic inputs connected)
- Max level: +21 dBu
- +20 dB digital gain on each input
- Analog outputs:
- 8 x 1/4-inch TRS line out (balanced, DC coupled)
- 2 x male XLR out
- Max level: +21 dBu
- 2 x 1/4-inch TRS stereo headphone (see below)
- 2 x 1/4-inch TRS sends (pre-converter)
- Digital I/O:
- 2 banks (16 ch) of ADAT optical I/O at 1x sample rates
- 2 banks (8 ch) of S/MUX optical I/O at 2x sample rates
- Bank A switchable to stereo TOSLink I/O (optical S/PDIF)
- 1 x stereo S/PDIF I/O on RCA (up to 96 kHz)
- Computer I/O:
- 1 x USB-C 3.1 / USB2 * audio class compliant
- 1 x IF-certified USB 3.2 Gen1 Type C-to-C cable included
- Compatible with USB Type A (with C-to-A cable)
- Total USB audio channels: see "Total Audio I/O" below
- Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)
- Total audio I/O:
- 28 in / 32 out (60 total channels) at 1x sample rates
- 20 in / 24 out (44 total channels) at 2x sample rates
- 10 in / 14 out (24 total channels) at 4x sample rates
- MIDI I/O:
- 1 x MIDI In
- 1 x MIDI Out/Thru
- 16 MIDI channels to/from computer host
- Headphone:
- 2 x 1/4-inch TRS stereo headphones
- Output impedance: <1Ohm
- Max output: 14.4 dBu
- Phantom power: 2 x individual +48V
- Foot Switch:
- 1 x 1/4-inch foot switch input
- Mapping: pedal up/down to any host keystrokes
- Sync I/O:
- 1 x BNC Word Clock In
- 1 x BNC Word Clock Out/Thru
- Sample rates: all (from 44.1 to 192 kHz)
- Front panel:
- 2 x XLR/TRS combo inputs
- 2 x 1/4" TRS headphone outputs
- 2 x potentiometer * headphone volume
- 2 x potentiometer * mic/instr input gain
- 1 x potentiometer * menu navigation
- 1 x large potentiometer * main volume
- 12 x switches * (2) 48V, (2) pad, (6) control room, (2) nav
- 1 x 3.9-inch 480 x 128 pixel 24-bit RGB TFT display
- 1 x latching power button
- Power:
- Internal 100-240V autoswitching supply
- 50-60 Hz * 0.5A max
- Dimensions and weight (WxDxH, enclosure only):
- 19 x 12.25 x 1.75 inches / 48.26 x 31.1 x 4.44 cm
- 11 lbs / 5 kgs
- Mac System Requirements:
- Intel Core i3 Mac or faster (including Apple silicon Macs)
- 4 GB RAM; 8 GB or more recommended
- macOS version 10.13 or later
- Available Hi-Speed or Super-Speed USB port
- A large hard drive (at least 500 GB for recording)
- Windows System Requirements:
- Intel Core i3 PC (or AMD equivalent)
- 4 GB RAM; 8 GB or more recommended
- Windows 10 or later (x64 AMD/Intel only)
- Available Hi-Speed or Super-Speed USB port
- A large hard drive (at least 500 GB for recording)
- Class-Compliant Support: USB audio class compliant for plug-and-play operation on Mac or iOS (no driver required)
- Included Software:
- CueMix 5
- MOTU Performer Lite
- Ableton Live Lite
- 6 GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU
- The 828 ships with standard Core Audio drivers for macOS for compatibility with virtually all Core Audio-compatible apps, including:
- MOTU Performer Lite
- MOTU Digital Performer
- Avid Pro Tools (version 9 or later)
- Apple Logic Pro
- Apple Logic Express
- Apple Garage Band
- Apple SoundTrack Pro
- Ableton Live
- Presonus Studio One
- Propellerhead Record & Reason
- Steinberg Cubase
- Cockos Reaper
- Native Instruments Kontakt
- Waves stand-alone apps (and plug-ins, via compatible host)
- Compatible Windows Software
- The 828 ships with standard ASIO and Wave drivers for Windows 10 and 11 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including:
- MOTU Performer Lite
- MOTU Digital Performer
- Avid Pro Tools (version 9 or later)
- Ableton Live
- Cakewalk Sonar
- Cockos Reaper
- Image Line FL Studio
- Native Instruments Kontakt
- Presonus Studio One
- Propellerhead Record & Reason
- Sony Vegas Pro
- Sony Sound Forge
- Sony Acid
- Steinberg Cubase
- Waves stand-alone apps (and plug-ins, via compatible host)
- Mic/line/instr inputs:
- 2 x XLR/TRS "combo" jacks
- Individual -20 dB pad and 48V phantom power
- Preamp gain: +74 dB in 1 dB increments
- 1 MOhm impedance on the line/instr inputs
- Analog inputs:
- 8 x 1/4-inch TRS line in (balanced/unbalanced)
- 2 x 1/4-inch insert returns function as TRS line inputs (with no mic inputs connected)
- Max level: +21 dBu
- +20 dB digital gain on each input
- Analog outputs:
- 8 x 1/4-inch TRS line out (balanced, DC coupled)
- 2 x male XLR out
- Max level: +21 dBu
- 2 x 1/4-inch TRS stereo headphone (see below)
- 2 x 1/4-inch TRS sends (pre-converter)
- Digital I/O:
- 2 banks (16 ch) of ADAT optical I/O at 1x sample rates
- 2 banks (8 ch) of S/MUX optical I/O at 2x sample rates
- Bank A switchable to stereo TOSLink I/O (optical S/PDIF)
- 1 x stereo S/PDIF I/O on RCA (up to 96 kHz)
- Computer I/O:
- 1 x USB-C 3.1 / USB2 * audio class compliant
- 1 x IF-certified USB 3.2 Gen1 Type C-to-C cable included
- Compatible with USB Type A (with C-to-A cable)
- Total USB audio channels: see "Total Audio I/O" below
- Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)
- Total audio I/O:
- 28 in / 32 out (60 total channels) at 1x sample rates
- 20 in / 24 out (44 total channels) at 2x sample rates
- 10 in / 14 out (24 total channels) at 4x sample rates
- MIDI I/O:
- 1 x MIDI In
- 1 x MIDI Out/Thru
- 16 MIDI channels to/from computer host
- Headphone:
- 2 x 1/4-inch TRS stereo headphones
- Output impedance: <1Ohm
- Max output: 14.4 dBu
- Phantom power: 2 x individual +48V
- Foot Switch:
- 1 x 1/4-inch foot switch input
- Mapping: pedal up/down to any host keystrokes
- Sync I/O:
- 1 x BNC Word Clock In
- 1 x BNC Word Clock Out/Thru
- Sample rates: all (from 44.1 to 192 kHz)
- Front panel:
- 2 x XLR/TRS combo inputs
- 2 x 1/4" TRS headphone outputs
- 2 x potentiometer * headphone volume
- 2 x potentiometer * mic/instr input gain
- 1 x potentiometer * menu navigation
- 1 x large potentiometer * main volume
- 12 x switches * (2) 48V, (2) pad, (6) control room, (2) nav
- 1 x 3.9-inch 480 x 128 pixel 24-bit RGB TFT display
- 1 x latching power button
- Power:
- Internal 100-240V autoswitching supply
- 50-60 Hz * 0.5A max
- Dimensions and weight (WxDxH, enclosure only):
- 19 x 12.25 x 1.75 inches / 48.26 x 31.1 x 4.44 cm
- 11 lbs / 5 kgs
- Mac System Requirements:
- Intel Core i3 Mac or faster (including Apple silicon Macs)
- 4 GB RAM; 8 GB or more recommended
- macOS version 10.13 or later
- Available Hi-Speed or Super-Speed USB port
- A large hard drive (at least 500 GB for recording)
- Windows System Requirements:
- Intel Core i3 PC (or AMD equivalent)
- 4 GB RAM; 8 GB or more recommended
- Windows 10 or later (x64 AMD/Intel only)
- Available Hi-Speed or Super-Speed USB port
- A large hard drive (at least 500 GB for recording)
- Class-Compliant Support: USB audio class compliant for plug-and-play operation on Mac or iOS (no driver required)
- Included Software:
- CueMix 5
- MOTU Performer Lite
- Ableton Live Lite
- 6 GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU
- The 828 ships with standard Core Audio drivers for macOS for compatibility with virtually all Core Audio-compatible apps, including:
- MOTU Performer Lite
- MOTU Digital Performer
- Avid Pro Tools (version 9 or later)
- Apple Logic Pro
- Apple Logic Express
- Apple Garage Band
- Apple SoundTrack Pro
- Ableton Live
- Presonus Studio One
- Propellerhead Record & Reason
- Steinberg Cubase
- Cockos Reaper
- Native Instruments Kontakt
- Waves stand-alone apps (and plug-ins, via compatible host)
- Compatible Windows Software
- The 828 ships with standard ASIO and Wave drivers for Windows 10 and 11 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including:
- MOTU Performer Lite
- MOTU Digital Performer
- Avid Pro Tools (version 9 or later)
- Ableton Live
- Cakewalk Sonar
- Cockos Reaper
- Image Line FL Studio
- Native Instruments Kontakt
- Presonus Studio One
- Propellerhead Record & Reason
- Sony Vegas Pro
- Sony Sound Forge
- Sony Acid
- Steinberg Cubase
- Waves stand-alone apps (and plug-ins, via compatible host)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 17.4 lbs
- Shipping Dimensions: 26 x 18 x 7 in
- Manufacturer Part Number (MPN): 9390
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 617-576-2760
Web: https://motu.com/techsupport
Phone: 617-576-2760
Web: https://motu.com/techsupport
New
$995.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.