Mesa/Boogie Rosette Acoustic DI-Preamp Pedal
No longer available at zZounds










zZounds Gear Experts Say...
Leave no tone behind! The Mesa/Boogie Rosette acoustic DI-preamp accurately represents your acoustic signal through front of house speakers or in a DAW.
Overview
The Mesa/Boogie Rosette DI is an acoustic instrument direct interface that puts accurate reproduction at the top of the list, and also offers comprehensive shaping power for enhancement when you might need it.
The Rosette starts with the same front end and EQ circuitry used in the Rosette 300 Two:Eight Combo, minus the mic input. Both products' circuit design is derived from high end recording console design. This no-compromise approach ensures the purest signal path and lowest noise specs while at the same time ensuring detailed, rich musicality and unrivaled accuracy. As you would expect on any pro console, both input gain and phase are addressed in the INPUT control and PHASE switch. A wide range of high impedance pickups are handled easily with the optimized, current source-biased FET input stage. The phase relation between pickup output and whatever speakers are being driven can be addressed by flipping the PHASE switch on the Rosette DI for easy comparison to decrease or eliminate feedback or even improve your overall tone.
From there Mesa has included two additional sweep-able filters to assist with feedback elimination in the live performance environment. NOTCH FILTER cuts a chosen frequency in a narrow band to remove resonant frequencies that cause feedback. This Filter removes those frequencies as it is rotated clockwise. The HI-PASS is also a Filter that cuts frequencies in the sub-harmonic range as it is turned clock-wise. This is very helpful in both eliminating… read more unwanted low frequency feedback on stage as well as tightening up the low-end for specific instruments or musical styles.
A footswitchable BOOST is incorporated for increasing the level of certain musical sections like solos or anyplace a level increase is needed. The BOOST LEVEL sets the amount of BOOST when the BOOST switch is engaged. Additionally a footswitchable MUTE is also included which mutes the signal at the Rear Panel outputs but does not mute the side TUNER Output, enabling you to employ silent tuning between songs.
The fully professional EQ Section incorporates fixed shelving BASS and TREBLE controls plus two semi-parametric MID bands covering LOW and HIGH midrange frequencies. These can overlap for finite control over adjacent midrange frequencies or one might be used to combat feedback while the other is applied for Tone shaping duties.
Experience the Rosette DI Preamp -- the result of 48 years of definitive amp design and a focus to deliver the most accurate reproduction of your instrument's acoustic sound possible in amplification. read less
The Rosette starts with the same front end and EQ circuitry used in the Rosette 300 Two:Eight Combo, minus the mic input. Both products' circuit design is derived from high end recording console design. This no-compromise approach ensures the purest signal path and lowest noise specs while at the same time ensuring detailed, rich musicality and unrivaled accuracy. As you would expect on any pro console, both input gain and phase are addressed in the INPUT control and PHASE switch. A wide range of high impedance pickups are handled easily with the optimized, current source-biased FET input stage. The phase relation between pickup output and whatever speakers are being driven can be addressed by flipping the PHASE switch on the Rosette DI for easy comparison to decrease or eliminate feedback or even improve your overall tone.
From there Mesa has included two additional sweep-able filters to assist with feedback elimination in the live performance environment. NOTCH FILTER cuts a chosen frequency in a narrow band to remove resonant frequencies that cause feedback. This Filter removes those frequencies as it is rotated clockwise. The HI-PASS is also a Filter that cuts frequencies in the sub-harmonic range as it is turned clock-wise. This is very helpful in both eliminating… read more unwanted low frequency feedback on stage as well as tightening up the low-end for specific instruments or musical styles.
A footswitchable BOOST is incorporated for increasing the level of certain musical sections like solos or anyplace a level increase is needed. The BOOST LEVEL sets the amount of BOOST when the BOOST switch is engaged. Additionally a footswitchable MUTE is also included which mutes the signal at the Rear Panel outputs but does not mute the side TUNER Output, enabling you to employ silent tuning between songs.
The fully professional EQ Section incorporates fixed shelving BASS and TREBLE controls plus two semi-parametric MID bands covering LOW and HIGH midrange frequencies. These can overlap for finite control over adjacent midrange frequencies or one might be used to combat feedback while the other is applied for Tone shaping duties.
Experience the Rosette DI Preamp -- the result of 48 years of definitive amp design and a focus to deliver the most accurate reproduction of your instrument's acoustic sound possible in amplification. read less
Specs
- Preamp Type: Solid-State
- Channels and Inputs: 1 Channel / 1/4" Pickup Input (active or passive)
- EQ: Variable Notch Filter (40Hz to 500Hz), Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls
- FX / Boost (solo): FX Loop / Footswitchable Boost (Solo) with Variable Boost Level Control
- Footswitchable Functions: Mute & Boost (Solo)
- Weight: 2 lbs.
- Dimensions: 2.2625" H x 5.5" W x 8.1875" D
- Available Formats: DI-Preamp Pedal
- Preamp Type: Solid-State
- Chassis Material: Aluminum
- Convection or Fan Cooling: Convection (silent)
- Number of Channels & Input Options: 1 Channel / 1/4" Pickup Input (active or passive)
- Preamp Details: Solid-State Preamp featuring Phase Switch, Input Level Control, Boost Footswitch with Variable Boost Level Control, Variable Notch Filter (40Hz to 500Hz), Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls, Seperate Preamp Output Level Control (dedicated to the Line Level Preamp Outputs) & Mute/Tune Footswitch
- Effects Loop: FX Loop
- Boost (Solo) Level Control: Yes - Footswitchable
- Output Options: Balanced XLR Mic Level (DI) Out with Pre/Post & Ground Lift Switches, Line Level Preamp Outputs controlled by the Preamp Output Level Control - Unbalanced & Balanced with Ground Lift Switch (drives any amp)
- Tuner Output / Mute: Yes with Footswitchable Mute
- Channels and Inputs: 1 Channel / 1/4" Pickup Input (active or passive)
- EQ: Variable Notch Filter (40Hz to 500Hz), Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls
- FX / Boost (solo): FX Loop / Footswitchable Boost (Solo) with Variable Boost Level Control
- Footswitchable Functions: Mute & Boost (Solo)
- Weight: 2 lbs.
- Dimensions: 2.2625" H x 5.5" W x 8.1875" D
- Available Formats: DI-Preamp Pedal
- Preamp Type: Solid-State
- Chassis Material: Aluminum
- Convection or Fan Cooling: Convection (silent)
- Number of Channels & Input Options: 1 Channel / 1/4" Pickup Input (active or passive)
- Preamp Details: Solid-State Preamp featuring Phase Switch, Input Level Control, Boost Footswitch with Variable Boost Level Control, Variable Notch Filter (40Hz to 500Hz), Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls, Seperate Preamp Output Level Control (dedicated to the Line Level Preamp Outputs) & Mute/Tune Footswitch
- Effects Loop: FX Loop
- Boost (Solo) Level Control: Yes - Footswitchable
- Output Options: Balanced XLR Mic Level (DI) Out with Pre/Post & Ground Lift Switches, Line Level Preamp Outputs controlled by the Preamp Output Level Control - Unbalanced & Balanced with Ground Lift Switch (drives any amp)
- Tuner Output / Mute: Yes with Footswitchable Mute
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 707-789-3348
Web: https://www.mesaboogie.com/support/index.html
Phone: 707-789-3348
Web: https://www.mesaboogie.com/support/index.html
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.