Maestro Fuzz-Tone FZ-M and Discoverer Delay Pedal Bundle

zZounds Gear Experts Say...

A bundle of classic effects that deliver sought after tones, Maestro's pedal bundle features a Fuzz-Tone FZ-M and a Discoverer delay pedal.

Overview

Combine a modern analog, bucket brigade-powered delay and classic rock 'n' roll fuzz tones in your rig with this incredible Maestro bundle! Maestro's Discoverer Delay and the legendary Fuzz-Tone work better together, so why not get both at the same time?

Maestro Discoverer Delay
The Maestro Discoverer Delay is a modern analog delay pedal that proudly utilizes legendary analog bucket brigade device (BBD) technology to deliver classic, warm, and inviting delay sounds. The intuitive 3-knob control layout lets users quickly dial up the length of the Delay time (with a range from 20 ms to 600 ms), the amount of Sustain (delay repeats), and adjust the level of the delays in the Mix.
A toggle switch engages built-in modulation that applies anything from a slightly saturated, tape-like wow and flutter effect to a heavily pitch-shifted modulation effect to the delayed signal. Two internal trim pots allow the user to adjust the Rate (speed) and Width (sweep range) of the modulation. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it's on, so you'll always know when the effect is active.

Maestro Fuzz-Tone FZ-1
Maestro created the world's first fuzz pedal -- the Maestro Fuzz-Tone FZ-1. Introduced in 1962, the Fuzz-Tone became the sound of rock and roll and a must-have accessory for guitarists everywhere after the success of 1965's (I Can't Get No) Satisfaction by the Rolling Stones, which prominently featured its cutting edge sound. Now Maestro… read more is bringing the fun and sonic fury of those early Fuzz-Tones back with the Maestro Fuzz-Tone FZ-M. This all-analog pedal boasts a Mode toggle switch that provides two pedals in one functionality for increased sonic versatility with both an FZ-1 inspired fuzz sound and a thicker, more modern fuzz tone.
Its 3-knob control layout gives you intuitive control. The Attack knob controls the amount of fuzz. The Tone control lets you adjust the timbre from bright and raspy to warm and wooly and anywhere in between. Use the Level control to set the output volume; it can go way beyond unity gain when desired. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it's on, so you'll always know when the effect is active.

Dive into the entire line of Maestro Electronics pedals with this zZounds exclusive demo:

Specs

- Discoverer Delay Controls:

Delay, Mix, Sustain; internal Modulation Rate and Width trimpots
- Switches: True Bypass footswitch, Mod On/Off Modulation Mode toggle switch
- LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
- Signal Processing: All-Analog
- Delay Time Range: 20 ms - 600 ms
- Power Requirements: 9V battery or regulated 9VDC power supply (5.5 x 2.1mm plug, wired center negative)
- Current Draw: 34 mA
- Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
- Input Impedance: 470K ohms

- Fuzz-Tone Controls:

Attack, Tone, Level
- Switches: True Bypass footswitch, Modern/Classic Mode toggle switch
- LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
- Signal Processing: All-Analog
- Power Requirements: 9V battery or regulated 9VDC power supply (5.5 x 2.1mm plug, wired center negative)
- Current Draw: 5.5 mA
- Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
- Input Impedance: 32K ohms
- Output Impedance: 5K ohms
- Switching: True Bypass
- Dimensions (D x W x H): 5.04" x 3.45" x 2.5", including feet, knobs, jacks, etc.
- Weight (Including Battery): 1.3 lb. / 589.67 gm.
- Output Impedance: 1K ohms
- Switching: True Bypass
- Dimensions (D x W x H): 5.04" x 3.45" x 2.5", including feet, knobs, jacks, etc.
- Weight (Including Battery): 1.3 lb. / 589.67 gm

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 3.18 lbs