Laney TT100H Guitar Amplifier Head (100 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Laney TT100H Guitar Amplifier Head (100 Watts), Main
Laney TT100H Guitar Amplifier Head (100 Watts), Full Stack Example With Optional Cabs
Laney TT100H Guitar Amplifier Head (100 Watts), Main Laney TT100H Guitar Amplifier Head (100 Watts), Full Stack Example With Optional Cabs
zZounds Gear Experts Say...
Uses premium ECC83, and EL34 tubes. Includes FS6 footswitch.

The TT100H - a 100-watt head, featuring a completely new pre-amp. Three channels Clean, Crunch & Lead each feature independent three band EQ, volume, bright switch and reverb. The two gain channels feature a Modern Switch which gives you super smooth response whilst the Lead channel features an additional Xpand and boost switch. Xpand breathes life back into your tone at high gain. The power section features two independent footswitchable master volumes, allowing you to give yourself a boost whatever channel you are on, great for the clean lead breaks.

All footswitchable features on the TT50/100 amplifiers are fully MIDI switchable and each amp is equipped with MIDI in, MIDI thru & MIDI out 7 pin connections which support phantom power. The onboard MIDI can be used to switch external MIDI devices via the dedicated FS6 footswitch.

Power RMS: 100 Watts

Inputs: Single Jack

Channels: 3

Equalization: Independent Bass, Middle & Treble for each channel

Master Presence Control: Yes

Bright Switch: 3: 1 per channel

Xpand Switch: Yes (on channel 3)

Boost Switch: Yes (on channel 3)

Modern Switch: Yes (on channel 3)

Switchable Damping: Yes

Twin Footswitchable Master Volumes: Yes

Preamp Valves: Premium ECC83

Output Valves: Premium EL34

Class: A/B

Reverb: Yes- With independent levels on each channel plus global master level

Line Out: Yes

Record Out: Yes

Footswitch: FS6 (Included)

Speaker connections: Connections for 1 x 16 ohm, 2 x 16 ohm, 1 x 8 Ohm, 2 x 8 ohm

FX Loop(s): Yes (with mix control- 100% Dry to 100% Wet)

MIDI IN / OUT / THRU: Yes- supports phantom power

Weight: 25 kg

Dimensions (mm): Width 654 x Height 279 x Depth 253

Master Section: Damping and Amp Mute switch, Reverb, FX and Presence Level control

Master volume: Yes - 2 (foot and MIDI switchable)

For support or warranty questions, please contact the manufacturer:
Phone: 615-793-8787
Email: support@laney.co.uk
Users Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer