Lauten Audio LS-308 Noise-Rejecting Condenser Microphone

Isolate your source, even in noisy environments, with this microphone's super-tight pattern! The Lauten LS-308 delivers 270 degrees of off-axis rejection.

The LS-308 is a noise-rejecting condenser microphone from Lauten Audio.

Unmatched Isolation

270 degrees of off-axis rejection allows you to confidently capture loud, impactful sounds live without the need to replace toms or re-track guitars due to bleed.

Ultra-High SPL and Dynamic Range

Capable of withstanding a staggering 135dB of SPL without internal padding, the LS-308 is nearly impossible to overload. Capture the loudest sound sources reserved for dynamic microphones with ease.

Dark By Design

Creating a microphone with such strong off-axis rejection had a unique timbral side-effect -- a sound similar to a ribbon microphone, but without the fragility. This classic timbre can be further shaped with two analog filters that allow for immediate sound-shaping right at the source.

Premium Components

The LS-308 signal path is finalized with high resolution, low distortion polypropylene capacitors and resistors, a US made low-noise FET, and a custom wound output transformer. The result is a massively impactful sound with unmatched isolation and SPL handing.

Designed by Lauten Audio

Each new LS-308 is designed and built to last a lifetime by the Lauten Audio family.

Type: Side-address pressure gradient FET condenser
Capsule: 35mm
Polar Patterns: Second-order Cardioid
Freq. Response: 20Hz-20KHz (Roll off begins at 7kHz due to rejection)
Dynamic Range: 135dB
SPL handling: >135dB (0.5%THD@1000Hz)
Impedance: >150 ohms
Self-noise level: <15dB-A
Sensitivity: 10.5mV/Pa -46dBV (0dB=1V/Pa 1KHz)
Connector: 3-pin XLR
Power: Requires 48v Phantom Power

Ideal For Use On:
- Electric guitar
- Toms
- Bottom Snare
- Any source where isolation is needed
- Loud sounds that would damage a ribbon or condenser element
NOTE: The LS-308 is NOT recommended for use on vocals

In The Box:
- LS-308
- Flight Case
- Adjustable Hard Mount
- Foam Windscreen
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 5.5 lbs
Shipping Dimensions: 13 x 10 x 6 in
Manufacturer Part Number (MPN): LS-308
Warehouse Resealed
Shipping Weight: 5.5 lbs
Shipping Dimensions: 13 x 10 x 6 in
Manufacturer Part Number (MPN): LS-308

For support or warranty questions, please contact the manufacturer:
Phone: 877-721-7018


  • 8 x  
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to