- Microphone Input: 2x balanced XLR
- Pin 2 hot / Pin 3 cold / Pin 1 ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Range: 48 dB
- Phantom Power: +48V ± 4V
- Frequency Response: from 5 Hz to 21 kHz (-3dB) Gain @ min, from 30 Hz to 21 kHz (-3dB) Gain @ max
Input Noise: -103 dB(A) Gain @ min, -86 dB(A) Gain @ max
- Instrument Input: 2x unbalanced, Hi-Z, TS 1/4” Jack
- Tip signal / Shield ground
- Instrument Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 1 MOhms
- Gain Range: 27 dB
- Frequency Response: from 2 Hz to 21 kHz (-3dB) Gain @ min, from 5 Hz to 21 kHz (-3dB) Gain @ max
Input Noise: -104 dB(A) Gain @ min, -102 dB(A) Gain @ max
- Line Outputs: 2x balanced, TRS 1/4” Jack
- Tip hot / Ring cold / Shield ground
- Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
- Maximum Output Level: +16 dBu into 600 Ohms balanced load
- Frequency Response: from 10 Hz to 21 kHz (-3dB)
- Output Dynamic Range: 106 dB(A)
- Output Impedance: 150 Ohms balanced
- AD and DA Resolution: 24-bit
- Sampling Rate: 44.1 kHz and 48 kHz
- Power: USB bus power, battery power (2xAA - included), or DC power supply (9VDC, from 500mA up, positive outside - not included)
- Metering: Multicolor LED
- Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)
- Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)
*Max load condition: both inputs connected to two 1,5mA phantom powered loads, input gains set to maximum, outputs set to maximum.
**Min load condition is as follows: music playing, phantom power OFF.
- Size: 75mm/2.95" x 127mm/5" x 37mm/1.46"
- Weight: 197.2g/6.96oz (batteries excluded)
- Lightning to Mini-DIN connection cable: 60cm/23.62"
- Micro-USB-OTG to Mini-DIN connection cable: 60cm/23.62"
- USB to Mini-DIN connection cable: 60cm/23.62"
- 2.5mm jack to MIDI cable: 160cm/63"
iOS Devices: Compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required.
Mac: Mac OS X 10.6 or later. One free USB port.
Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.)
Android Devices: Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
- Dimensions and Weight in Packaging
- Base Item
Shipping Weight: 1.25 lbs
Shipping Dimensions: 10 x 7 x 3 in
Manufacturer Part Number (MPN): IP-IRIG-PRODUOIO-IN