HeadRush FRFR108 MKII Powered Speaker Cabinet
zZounds Gear Experts Say...
The perfect platform for amp-modeling pedals, the HeadRush FRFR-108 MKII delivers 2000 watts of uncolored sound with a host of stage-friendly features.
Overview
The HeadRush FRFR-108 MKII powered speaker cab is the perfect partner for amp modelers! If you're new to FRFR amplifiers, FRFR stands for "full-range flat-response." This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true "amp in the room" sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.
PURE AND POWERFUL TONE
FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal.
Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 MKII delivers a precise, full response across the entire frequency range, without any artificial coloration--which is critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.
ALL THE CONNECTIONS YOU NEED - INCLUDING BLUETOOTH
FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks.… read more There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.
ADAPTS TO ANY STAGE OR ROOM
Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII's ground lift switch can eliminate hums and buzzes resulting from ground loops.
ROAD-READY LIGHTWEIGHT DESIGN
FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.
- Specially voiced 8-inch woofer and high-frequency compression driver
- Two combo XLR + 1/4" inputs
- Wirelessly connect a mobile device via Bluetooth
- HPF cut switch to quickly pull those troublesome frequencies out
- Ground lift switch can eliminate hums and buzzes
- Can also be used in an upright or pole-mounted position
- Rugged yet lightweight and easy to transport
read less
PURE AND POWERFUL TONE
FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal.
Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 MKII delivers a precise, full response across the entire frequency range, without any artificial coloration--which is critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.
ALL THE CONNECTIONS YOU NEED - INCLUDING BLUETOOTH
FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks.… read more There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.
ADAPTS TO ANY STAGE OR ROOM
Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII's ground lift switch can eliminate hums and buzzes resulting from ground loops.
ROAD-READY LIGHTWEIGHT DESIGN
FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.
Features:
- Special type of amplification for amp modeling pedals and pedalboards- Specially voiced 8-inch woofer and high-frequency compression driver
- Two combo XLR + 1/4" inputs
- Wirelessly connect a mobile device via Bluetooth
- HPF cut switch to quickly pull those troublesome frequencies out
- Ground lift switch can eliminate hums and buzzes
- Can also be used in an upright or pole-mounted position
- Rugged yet lightweight and easy to transport
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
-Output Power: 2000 W
-Low-Frequency Driver: 8.0" (203 mm) driver, 2.0" (50 mm) high-temperature voice coil.
-High-Frequency Driver: 1.0" (25 mm) exit ceramic driver with 1.4" (35 mm) coil.
-Crossover Frequency: 2 kHz
-Maximum SPL: 129 dB (peak) dB-SPL @ 1 m
-Frequency Response: 62 Hz - 20 kHz (+/-3 dB)
-Frequency Range: 52 Hz - 20 kHz (-10 dB)
-Horn Coverage: 90* horizontal x 60* vertical (nominal)
-Inputs: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)
-Outputs: (1) XLR output (Link)
-Input Impedance Line: 10 KO balanced, 20 KO unbalanced
-Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output
-HPF Switch: 100 Hz
-Bluetooth:
- Version: 5.0
- Profile: A2DP, AVRCP
- Codec: SBC
- Range: up to 100 feet (30.5m)
-Power Connection: IEC power cable
-Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
-Consumption: 1100W
-Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
-Protection: Electronic clip, thermal, and transducer overdrive protection
-Mounting/Installation: Standard 36 mm pole socket
-Operating Temperature: 14*F to 113*F / -10*C to 45*C
-Dimensions (WxDxH): 10.1" x 9.6" x 17.2" (256 mm x 245 mm x 436 mm)
-Weight: 21.05 lbs. (9.5 kg)
-Low-Frequency Driver: 8.0" (203 mm) driver, 2.0" (50 mm) high-temperature voice coil.
-High-Frequency Driver: 1.0" (25 mm) exit ceramic driver with 1.4" (35 mm) coil.
-Crossover Frequency: 2 kHz
-Maximum SPL: 129 dB (peak) dB-SPL @ 1 m
-Frequency Response: 62 Hz - 20 kHz (+/-3 dB)
-Frequency Range: 52 Hz - 20 kHz (-10 dB)
-Horn Coverage: 90* horizontal x 60* vertical (nominal)
-Inputs: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)
-Outputs: (1) XLR output (Link)
-Input Impedance Line: 10 KO balanced, 20 KO unbalanced
-Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output
-HPF Switch: 100 Hz
-Bluetooth:
- Version: 5.0
- Profile: A2DP, AVRCP
- Codec: SBC
- Range: up to 100 feet (30.5m)
-Power Connection: IEC power cable
-Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
-Consumption: 1100W
-Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
-Protection: Electronic clip, thermal, and transducer overdrive protection
-Mounting/Installation: Standard 36 mm pole socket
-Operating Temperature: 14*F to 113*F / -10*C to 45*C
-Dimensions (WxDxH): 10.1" x 9.6" x 17.2" (256 mm x 245 mm x 436 mm)
-Weight: 21.05 lbs. (9.5 kg)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 25.25 lbs
- Shipping Dimensions: 21 x 14 x 14 in
- Manufacturer Part Number (MPN): FRFR108MK2XUS
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 401-658-3131
Web: https://www.headrushfx.com/support
Phone: 401-658-3131
Web: https://www.headrushfx.com/support
New
Was $299.00
Save $50 thru Dec. 31
$249.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
Save $50! Was $299, Now Only $249!
- For a limited time, save $50 on a HeadRush FRFR108 MKII at zZounds. Hurry -- ends December 31!
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.