Galaxy Audio CTSR Wireless Receiver

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Galaxy Audio CTSR Wireless Receiver, Main
Galaxy Audio CTSR Wireless Receiver, Main
Galaxy Audio CTSR Wireless Receiver, Main Galaxy Audio CTSR Wireless Receiver, Main
The CTSR receiver pairs perfectly with your HH85 microphone or MPB85 transmitter and features 300' range, 920 selectable UHF frequencies, and much more!

The CTS Series wireless systems feature 920 selectable UHF frequencies, IR Sync, Auto Scan, Squelch Adjustment, BNC detachable diversity antennas, LCD display and much, much more. CTS series also features 16 frequency groups with 14 channels per group; 2 groups can be user defined. This includes the CTS Receiver, Antennas, 1/4" to 1/4" cable, Power Supply, Rack Ears, and Screws.

Features

- 300' Range
- Auto Scan
- True Diversity
- 920 Selectable UHF Frequencies
- Single/Dual Rack Mount Included

Available Frequencies: 920
Frequency Ranges:
CODE D 584 - 607 MHz
CODE J 514 - 537 MHz
Transmitter Output: 5 mW, 10 mW, 20 mW
Band: UHF
Operating Range: Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 60 Hz - 16 Hz
Total Harmonic Distortion: (+/-30 kHz deviation, 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F, battery characteristics may limit this range
Audio Output Level (+/-30kHz deviation 1kHz tone): XLR Connector (into 600 Ohms load) 6 dBV
1/4" Connector (into 3 k Ohms load): 0 dBV
Output Connection: 1 Male XLR Balanced, 1/4" Unbalanced
Output Impedance: XLR Connector 200 Ohms
1/4" Connector: 1 k Ohms
XLR Output: Impedance Balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity: -102 dBm
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1/2 U
Dimensions: 1.7" x "8.3" x 6.3" (45 x 212 x 160 mm) (HxWxD)
Weight: 31.7 oz (900 g)
Power Requirements: 12 V DC at 500 mA, supplied by external power supply

For support or warranty questions, please contact the manufacturer:
Phone: 800-369-7768 x101
Email: service@galaxyaudio.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer