Galaxy Audio PSER/52 Body Pack Wireless System

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Galaxy Audio PSER/52 Body Pack Wireless System, Main
Galaxy Audio PSER/52 Body Pack Wireless System, Main
Galaxy Audio PSER/52 Body Pack Wireless System, Main
Galaxy Audio PSER/52 Body Pack Wireless System, Main Galaxy Audio PSER/52 Body Pack Wireless System, Main Galaxy Audio PSER/52 Body Pack Wireless System, Main
zZounds Gear Experts Say...
Galaxy Audio's PSER/52 wireless system includes the PSER receiver and MBP52 bodypack transmitter. Add your own lavalier or headset mic, available separately.

Part of the Galaxy Audio PSE wireless series, the PSER/52 wireless system includes the PSER receiver, the MBP52 body-pack transmitter, antennas, 1/4" to 1/4" cable, power supply, rack ears, and screws.

Lavalier microphones and headset microphones are available separately to connect with the MBP52 body-pack transmitter.

The PSER multi-channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSER is a UHF diversity receiver with 16 selectable channels.

Features:

- 300' Range
- 16 Selectable UHF Frequencies
- Diversity Antennas
- Single/Dual Rack Mount Included
- Output Volume Control
- IR Sync Receiver to Transmitter
- AF Level Indicator
- Active Antenna Indicator
- Squelch Adjustment
- XLR / 1/4" Outputs
- Detachable BNC Antennas
- Metal Chassis

Audio Output Level: (+/-30 kHz deviation, 1 kHz tone)
- XLR Connector (into 600 Ohms load): -12 dBV
- 1/4" Connector (into 3 k Ohms load): -18 dBV

Output Connections:
- 1 Male XLR Balanced
- 1/4" Balanced

Output Impedance:
- XLR connector: 200 Ohms
- 1/4" connector: 1 k Ohms

XLR Output:
- Impedance balanced
- Pin 1: Ground (cable shield)
- Pin 2: Audio +
- Pin 3: No Audio -

Sensitivity: -93 dBm for 30 dB
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1 U
Dimensions: 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm)
Weight: 31 oz (880 g)
Power Requirements: 12-18 V DC at 300 mA, supplied by external power supply

For support or warranty questions, please contact the manufacturer:
Phone: 800-369-7768 x101
Email: service@galaxyaudio.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer