Galaxy Audio ECMR Wireless Receiver

Available Channels: 16
Frequency Range: CODE D 584~607 MHz, CODE N 518~542 MHz
Transmitter Output Level: 10 mW
Band: UHF
Operating Range Under Typical Conditions: 200' (61 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 70 Hz ~ 16 kHz
Total Harmonic Distortion:(+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F (-10 degrees C to +50 degrees C), battery characteristics may limit this range

ECM RECEIVER

Audio Output Level (+/-30kHz deviation, 1kHz tone):
- XLR connector (into 600 Ohms load) -12 dBV
- 1/4" connector: (into 3k Ohms load) -18 dBV

Output Connections: 1 Male XLR Balanced, 1/4" Unbalanced

Output Impedance:
- XLR connector 200 Ohms
- 1/4" connector: 1 k Ohms

XLR Output: Impedance balanced
- Pin 1: Ground (cable shield)
- Pin 2: Audio +
- Pin 3: No Audio -

Sensitivity: -93 dBm for 30 dB
Image Rejection: >90 dB
Casing: Rugged Plastic
Dimensions (HxWxD): 1.75" x 9.25" x 4.75" (44.45 x 235 x 121 mm)
Weight: 13.6 oz (390 g)
Power Requirements: 13.5 V dc at 300mA, supplied by external power supply
Dimensions and Weight in Packaging
Band D 584-607 MHz
Shipping Weight: 2.5 lbs
Shipping Dimensions: 18 x 11 x 3 in
Manufacturer Part Number (MPN): ECMRD
If you have additional warranty questions, please contact the manufacturer at 800-369-7768
Shipping to
💬
Chat With Us