Fishman Fluence Phase Inverter Kit




Add out-of-phase capability to your Fluence pickups with a Fishman Fluence Phase Inverter. Includes adjustable trim pot so you can dial in the perfect tone.
Overview
Fishman's Phase Inverter push/pull control allows convenient access to the out-of-phase tone, and includes a hidden set-and-forget potentiometer that also allows you to preset a "Peter Green" blended sound even with only one volume wiring!
For years, the sound of two pickups out-of-phase has been a staple tone for certain players, such as Peter Green and Jimmy Page, but it's a very distinctive sound. For this reason, many players want it available on a switch so they can go back to normal. In addition, the out-of-phase sound is so sensitive to the pickup levels and balance that Fishman included a trim pot for the phase inverted pickup that is capable of lowering the volume or raising it above unity gain so that you can preset the exact sound.
There are also players who want to combine different brands of pickups that are naturally out-of-phase without the wiring capabilities to reverse them, but the player wishes they were in phase. This can be used to correct that, and allow the pickups to be blended in phase.
Check your existing pot shafts and knobs before you order! Fishman offers 4 variations of this product with different dimensions and configurations - make sure you order the proper one for your instrument!
Most press-on knobs are made to fit a coarse 18-tooth knurled shaft potentiometer. Some Gibson-style knobs are available in both coarse 18-spline and fine 24-spline. If you currently have 24-spline knobs you may need replacement knobs designed for 18-spline shafts.… read more For many screw-tightening knobs, the 6mm solid (plain) shaft is the correct option. If you are unsure of which pot you are replacing, please research and confirm before you order.
- Conveniently mounted to a push-pull pot for easy on/off.
- Usable on any and all Fluence products
read less
For years, the sound of two pickups out-of-phase has been a staple tone for certain players, such as Peter Green and Jimmy Page, but it's a very distinctive sound. For this reason, many players want it available on a switch so they can go back to normal. In addition, the out-of-phase sound is so sensitive to the pickup levels and balance that Fishman included a trim pot for the phase inverted pickup that is capable of lowering the volume or raising it above unity gain so that you can preset the exact sound.
There are also players who want to combine different brands of pickups that are naturally out-of-phase without the wiring capabilities to reverse them, but the player wishes they were in phase. This can be used to correct that, and allow the pickups to be blended in phase.
Check your existing pot shafts and knobs before you order! Fishman offers 4 variations of this product with different dimensions and configurations - make sure you order the proper one for your instrument!
Most press-on knobs are made to fit a coarse 18-tooth knurled shaft potentiometer. Some Gibson-style knobs are available in both coarse 18-spline and fine 24-spline. If you currently have 24-spline knobs you may need replacement knobs designed for 18-spline shafts.… read more For many screw-tightening knobs, the 6mm solid (plain) shaft is the correct option. If you are unsure of which pot you are replacing, please research and confirm before you order.
Features
- Adjustable phase inverter for low impedance pickups.- Conveniently mounted to a push-pull pot for easy on/off.
- Usable on any and all Fluence products
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- In the bag:
- Phase Inverter Push-Pull Pot
- .47uF Capacitor(s) for use as a tone knob
- Installation Guide
- Phase Inverter Push-Pull Pot
- .47uF Capacitor(s) for use as a tone knob
- Installation Guide
- Dimensions and Weight in Packaging
- 3/8 inch x 3/4 inch, 18 tooth w/ knurled bushing
- Shipping Weight: 0.1 lbs
- Shipping Dimensions: 5 x 2 x 1 in
- Manufacturer Part Number (MPN): ACC-FLU-P41
- 3/8 inch x 3/8 inch, 18 tooth
- Shipping Weight: 0.24 lbs
- Shipping Dimensions: 8 x 5 x 1 in
- Manufacturer Part Number (MPN): ACC-FLU-P21
- 3/8 inch x 3/8 inch, plain w/ 6mm bushing
- Shipping Weight: 0.25 lbs
- Shipping Dimensions: 2 x 1 x 1 in
- Manufacturer Part Number (MPN): ACC-FLU-P31
- 8 millimeter x 10 millimeter, 18 tooth
- Shipping Weight: 0.12 lbs
- Shipping Dimensions: 9 x 5 x 1 in
- Manufacturer Part Number (MPN): ACC-FLU-P11
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-347-4626
Email: support@fishman.com
Phone: 800-347-4626
Email: support@fishman.com
3/8 inch x 3/4 inch, 18 tooth w/ knurled bushing
$69.95
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.