Foxgear Maitresse Flanger Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back
Foxgear Maitresse Flanger Pedal, Action Position Back Foxgear Maitresse Flanger Pedal, Action Position Back Foxgear Maitresse Flanger Pedal, Action Position Back Foxgear Maitresse Flanger Pedal, Action Position Back Foxgear Maitresse Flanger Pedal, Action Position Back Foxgear Maitresse Flanger Pedal, Action Position Back
zZounds Gear Experts Say...
Get that '60s flange all over again! Based on the MN3207 NOS chip, the all-analog Foxgear Maitresse flanger pedal delivers a vintage-inspired, wet flange.

The fully analog Foxgear Maitresse Flanger is based on an analog NOS chip, the MN3207, just like the old Electric Mistress. But, it takes inspiration even farther back to the '60s, to a time when the "flanger" effect was created by the musical pioneers such as Les Paul and Jimi Hendrix by using reel-to-reel systems and varying the speed of the tape to obtain a particular sound that was in-between that of a chorus and a flanger. That same tone was used in the following decades by people like Andy Summer of the Police, David Gilmour and many, many others.

The Foxgear Maitresse gives you the opportunity to reach that kind of legendary sound for a fraction of the price you might expect to pay. In comparison, the Foxgear Maitresse is absolutely quieter and respectful of the clean sound thanks to the bypass system that avoids any lack of volume or hi-frequency loss and "no-pop" when activated.

Specifications

Power In: 9 to 12VDC (negative TIP)
Consumption at 9V: <100mA
Input Impedance: <=1M Ohm
Output Impedance: <=10K Ohm
Width: 60mm. (2.3")
Length: 120mm. (4.7")
Height: 30mm. (1.1")
Weight: 0.2Kg. (0.4lbs)

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer