Fluid Audio SRI-2 2X2 USB Audio Interface

No longer available at zZounds
zZounds Gear Experts Say...
A robust USB-powered 2x2 audio interface with a slick desktop design, the Fluid Audio SRI-2 features two pairs of monitor outputs with A/B speaker switching.

Featuring a robust aluminum chassis, the Fluid Audio SRI-2 interface is a sturdy piece of gear reminiscent of the "old school" studios. Along with the striking design comes exceptional 21st century audio quality and functionality. Best-in-class digital converters capture the detailed nuance of every recording. The large volume knob provides accurate control of the output level, and direct monitoring provides zero-latency tracking. The 2 XLR/TRS combo inputs are conveniently mounted on the front of the SRI-2, so you can easily plug in your instrument or mic. The truly unique innovation of the SRI-2, however, is the speaker switching capability, which allows you to A-B your mix on two sets of speakers.

Big Volume Knob: Easy to reach on the top surface, the knob is solid aluminum with rubber grip for good weight and feel.

Inputs: Two combo XLR/TRS inputs are front mounted for easy access. High quality pre-amps insure crystal clear signal path. Low-noise mic preamps support 48V phantom power.

Controls: Inputs, buttons and knobs are placed conveniently on the top surface of the SRI-2. No need to to look down to see what is engaged. All is clearly in view while recording. LED indicators on all buttons and knobs able you to monitor yours settings even in dimly lit studios.

Ample Power from Headphone output: One of the most powerful headphone outputs in a USB powered device. Create tracks and overdubs with plenty of clarity and power. Works with headphones up to 250 ohms.

Peak read more Meter: Clear LED indicators help to clearly see you signal levels to avoid clipping

Record Anywhere: Compact, robust and USB powered. Take it with you anywhere. Use it on the go on your laptop or iPad with the included Cubasis LE Software (with Apple iPad Camera Connection Kit, not included) Includes Cubase LE for windows and OSX.

WDM / ASIO / Core Audio: No drivers needed for Windows or OSX. Fluid Audio Windows driver is supplied for an even more flexible setup. For DAW usage, driver is needed.

Zero Latency: Direct-monitoring knob provides zero-latency tracking

Features:

- Anodized aluminum chassis housing and master volume knob
- Professional grade 24-bit/192kHz digital conversion
- 2 class A microphone preamps with +48 V phantom power
- 2 x XLR/TRS combo inputs on the front panel for Line / Mic / Instrument recording
- 4 TRS outputs, for 2 monitor pairs with A / B button
- 1 headphone output with separate volume control, 2 x 75mW
- LED indicators on all knobs
- Powered by USB 2.0 connection
- Cubase LE DAW software included via download for PC and Mac
- Cubasis LE DAW for iPad (IOS 9 and later)
- OS support: OSX 10.6.4 and newer, Windows 7/8/8.1 and Windows 10 x86/x64
read less

MIC INPUT 1/2 (Balanced):
- Maximum Input Level: +7 dBu
- Input Impedance: 100 Ohm
- GAIN Range: +6 dB – +46 dB
- Frequency Response: +/- 0.1 dB, 20 Hz to 20 kHz
- Dynamic Range: 104 dB, A‐weighted
- THD+N: 0.0016%, 1 kHz, ‐1 dBFS, 20 Hz/20 kHz BPF
- Noise EIN: <‐120dBu (A‐Weighted)

HI‐Z INPUT 1/2 (Balanced):
- Maximum Input Level: +4 dBu
- Input Impedance: 1M Ohm
- GAIN Range: +12 dB – +52 dB
- Frequency Response: ±0.1 dB, 20 Hz to 20 kHz
- THD+N: 0.0031%, 1 kHz, ‐1 dBFS, 20 Hz/20 kHz BPF
- Dynamic Range: 104 dB, A‐weighted

LINE INPUT 1/2 (Balanced):
- Maximum Input Level: +25 dBu
- Input Impedance: 20k Ohm
- GAIN Selection: ‐11dB – +29 dB
- Frequency Response: ±0.1 dB, 20 Hz to 20 kHz
- THD+N: 0.005%, 1 kHz, ‐1 dBFS, 20 Hz/20 kHz BPF
- Dynamic Range: 104 dB, A‐weighted

MAIN OUTPUT L/R (Balanced):
- Maximum Output Level: +6 dBFS
- Output Impedance: 75 Ohm
- Frequency response: +0.1/‐0.1 dB, 20 Hz to 20 kHz
- Dynamic range: 102 dB, A‐weighted
- THD+N: 0.0014%, 1 kHz, 0 dBFS, 20 Hz/20 kHz BPF

PHONES:
- Maximum Output Level: 75 mW +75 mW, @ 32 Ohm
- Dynamic range: 100 dB, A‐weighted
- THD+N: 0.006%, 1 kHz, ‐1 dBFS, 20 Hz/20 kHz BPF
- Impedance <10 Ohm
- Maximum Output Level dBu: +12dBu

USB Specification: USB 2.0, 24‐bit, 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz

XLR INPUT Polarity:
- Pin 1: Ground
- Pin 2: Hot (+)
- Pin 3: Cold (‐)

For support or warranty questions, please contact the manufacturer:
Web: https://www.fluidaudio.com/support_request/

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted December 8, 2023 by a customer from gmail.com

"Most Underrated Audio Interface"

Overall: 5 out of 5 stars
(see rating details)
Verified Purchaser zZounds has verified that this reviewer purchased this specific product from us.
I havent seen alot of people look into Fluid Audios Interface I got it a couple months ago and want to give my honest review. I really love this better then any other budget friendly interface in the market. The signal is really good and clean and make terrible cheap mics sound good. I'v had multiple and nothing beats this interface. Having a button to quickly switch 2 sets of monitors is really good and all the knobs on top is really good if you have a messy table. NO LATENCY AT ALL even when live or even recording through my daw. If you don't have a daw and dont feel like paying for one it does come with Cubase LE. I would really love to see another exactly the same with ADAT and a rack interface and same look and colors. I would buy them no matter what Fluid Audio did not disappoint with my money nor did there monitors. Will highly recommend if your on a budget. Also there Support and team are really nice and helpful to contact them if you are having troubles.
1 of 1 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer