ESP LTD MH-1007QM Electric Guitar

Feature: What it does:
Quilted maple top Beautiful "wavy" grain; adds clarity
Mahogany body Rich, warm, focused sound; added sustain
Macassar ebony fretboard High-density wood; smooth playing feel
EMG 81-7H & 85-7H pickups Powerful and aggressive active humbuckers
- Construction: Set-Thru
- Scale: 25.5"
- Body: Mahogany
- Top: Quilted Maple
- Neck: 3 Piece Maple
- Fingerboard: Macassar Ebony
- Fingerboard Radius: 350mm
- Finish: Black Fade
- Nut Width: 48mm
- Nut Type: Locking
- Neck Contour: Thin U
- Frets/Type: 24 XJ
- Hardware Color: Black
- Strap Button: Standard
- Tuners: Grover
- Bridge: Floyd Rose 1000SE
- Neck Pickup: EMG 85-7H
- Bridge Pickup: EMG 81-7H
- Electronics: Active
- Electronics Layout: Vol/Tone/3-way Switch
- Strings: D'Addario XL110-7 (.010/.013/.017/.026/.036/.046/.059)
Dimensions and Weight in Packaging
Black Fade
Shipping Weight: 11.75 lbs
Shipping Dimensions: 42 x 18 x 4 in
Manufacturer Part Number (MPN): LMH1007QMBLKFD
Blemished, Black Fade
Shipping Weight: 11.75 lbs
Shipping Dimensions: 42 x 18 x 4 in
Manufacturer Part Number (MPN): LMH1007QMBLKFD
If you have additional warranty questions, please contact the manufacturer at 800-423-8388
(2 ratings)
Submitted February 6, 2020 by a customer from gmail.com
"Build quality is great. Wrong radius on nut and floyd rose 1000se."
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Great 7 string with a floyd. Black natural fade is great. Looks very nice in person. Contrast to the mahogany is wonderful with the binding. Not much of an emg fan but bought this knowing that this had everything else I wanted.First off: I am picky with guitars. I prefer a light action. Where the guitar is very easy to play and bend. I usually downtune because of this. Maybe im a wuss idk.This guitar came with the wrong radius floyd rose nut and bridge. Lowering the bridge causes the high e and low b to be the lowest in comparison to the middle strings. At the nut its very noticeable as most chords at the nut are way out of tune(compared to the normal slight warbling). The strings were also very stiff and hard to bend like it was an extended scale guitar.To remedy this I took the nut off and the floyd apart. I fine sanded the baseplate super flat. Removed the metal spacer plate between the block and floyd baseplate. My goal was to get it as flat as i could to help the energy of the strings not fight the floyd with its bad fit and finish. After doing this the strings were noticeably slinkier. I also noticed at the pivot edges the black/copper? Plating peels away after using it. Realizing this I just used the floyd while strung up from full divebomb to as far back as i felt comfortable. After doing this about 40 times i tuned up the guitar. This helped dramatically. The strings feel nice and easy to play and I now have about 80% of the guitar I originally intended to buy. Might replace the read more nut and floyd with the original since I believe this huitar might have been designed to be ised with an original floyd. Ill have to look into it further.4/5.

read less
1 of 1 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

Black Fade

$1,099.00
  • 18 x
  • 12 x
    $91.58
  • 8 x
    $137.38
  • 6 x
    $183.17
FREE -Day Shipping!
Get it  for
×
Get it by if you order within Faster Shipping
Shipping to
Shipping to
💬
Chat With Us