Eminence N320T HF Driver (100 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Eminence N320T HF Driver (100 Watts), Main
Eminence N320T HF Driver (100 Watts), Front
Eminence N320T HF Driver (100 Watts), Main Eminence N320T HF Driver (100 Watts), Front
Replace your old or blown tweeter with this lightweight neodymium-powered 2" driver. The Eminence N320T delivers clean output at a low crossover point.

The 2" exit N320T-8 sets the standard in compression drivers from Eminence. Featuring D3 technology (Damped Diametric Drive), a 3" voice coil, and lightweight neodymium ring magnet with a copper shorting ring, the N320T-8 offers an ultra-clean sound and low crossover point.

Take an in-depth tour of the Eminence speaker factory:

- Throat Size: 2" (50.80mm)
- Nominal Impedance: 8O
- Minimum Impedance: 6.7 ohm @ 3.6 kHz
- Power Rating: 100 W (AES)
- Resonance: 0.52kHz
- Usable Frequency Range: 800Hz-20kHz
- Recommended Crossover: 800 Hz / 12 dBkHz
- Sensitivity: 110.40
- Magnet Material: Neodymium
- Magnet Weight: 11oz (0.31kg)
- Voice Coil Diameter: 3" (76.20mm)
- Voice Coil Former: Polyimide
- Diaphragm Material: Titanium
- DC Resistance (Re) : 4.80O
- Overall Diameter: 5.72" (145.30mm_
- Driver Volume Displaced: 0.02 cu.ft., 0.80 liters
- Depth: 3.10" (78.70mm)
- Weight: 5 lbs (2.30 kg)
- Mounting Holes Diameter: 4X 1/4-20
- Mounting Holes B.C.D.: 4" (101.6 mm)

For support or warranty questions, please contact the manufacturer:
Phone: 502-845-5622
Email:
Web:
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer