Audio-Technica ATW-1322 Digital Dual Wireless Handheld Microphone System

Set up a pro-level 2.4 GHz digital wireless system with Audio-Technica. The ATW-1322 set includes two handheld mics and a dual-channel half-rack receiver.
Audio-Technica's System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

System 10 PRO Rack-Mount system includes an ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and ATW-T1002 x2 handheld dynamic unidirectional microphone/transmitter.

Audio-Technica gives you an overview of the features of the System 10 Pro Digital Wireless System:


Features:

- read more Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range - completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops


Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones



NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less
- Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Range: 60 m (200') Open range env. with no interfering signals
- Operating Temperature Range: 0* C to +40* C (32* F to 104* F) Battery performance may be reduced at very low temperatures
- Frequency Response: 20 Hz to 20 kHz

RECEIVER SPECIFICATIONS:
- Receiving System: Diversity (frequency/time/space)
- Output Connectors: Remote Receiver Connector: RJ45, Link Connector: RJ12
- Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
- Dimensions: (W x H x D) 8.26 x 1.76 x 6.67" (209.8 x 44 x 169.3mm)
- Net Weight: 33.2 oz (940 grams)
- Accessory Included: Power supply
- Accessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

HANDHELD TRANSMITTER SPECIFICATIONS:
- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Batteries: Two 1.5V AA not included
- Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
- Dimensions: (L x D) 10.03 x 1.97" (254.8 x 50mm)
- Net Weight: 9.9 oz (280g) without batteries
- Accessory Included: AT8456a Quiet-Flex stand clamp
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 7 lbs
Shipping Dimensions: 17 x 12 x 4 in
Manufacturer Part Number (MPN): AUD ATW1322
If you have additional warranty questions, please contact the manufacturer at 330-686-2600 x5000