Audio-Technica ATM350W Cardioid Condenser Instrument Microphone with Woodwind Mounting System

Reinforce flute, clarinet, and more! This Audio-Technica ATM-350 condenser mic comes with a 5" gooseneck and a UniMount woodwind mount, plus a violin mount.

This Audio-Technica ATM350a microphone comes with an AT8543 power module, AT8491W woodwind mount, AT8490 5" gooseneck, AT8468 violin mount (hook-and-loop fastener), and a protective carrying case.

Designed for use with woodwinds, the Audio-Technica ATM350W UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491W woodwind mount and strong, flexible AT8490 5" gooseneck, the mic can be securely fastened to any woodwind instrument and positioned to stay where you want it -- the gooseneck won't flop around no matter how much you move the instrument as you play.

The microphone's cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

Features:

- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount woodwind mount attaches securely to any woodwind instrument via a flexible strap, providing excellent shock resistance for the microphone
- Rugged UniMount 5" gooseneck read more rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Element: Fixed-charge back plate, permanently polarized condenser
- Polar pattern: Cardioid
- Frequency response: 40 - 20,000 hz
- Low frequency roll-off: 80 hz, 12 db/octave
- Open circuit sensitivity: -49 db (3.5 mv) re 1v at 1 pa
- Impedance: 200 ohms
- Maximum input sound level: 159 db spl, 1 khz at 1% t.h.d.
- Dynamic range (typical): 130 db, 1 khz at max spl
- Signal-to-noise ratio: 65 db, 1 khz at 1 pa
- Phantom power requirements: 11- 52v dc, 3.5 ma typical
- Switch: flat, roll-off
- Weight (microphone): 14.5 g (0.5 oz)
- Weight (power module): 90 g (3.2 oz)
- Dimensions (microphone): 37.8 mm (1.49") long, 12.2 mm (0.48") maximum body diameter
- Dimensions (power module): 92 mm (3.62") long, 18.9 mm (0.74") diameter
- Output connector (power module): Integral 3-pin XLR-M type
- Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with hirose hr10-type connector
- Optional interchangeable elements: Ue-h hypercardioid (100*); Ue-o omnidirectional (360*)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.5 lbs
Shipping Dimensions: 13 x 6 x 3 in
Manufacturer Part Number (MPN): ATM350W

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

New

$349.00
On Backorder
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to