Audio-Technica AT4022 Small-Diaphragm Condenser Microphone

This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio-Technica AT4022 Small-Diaphragm Condenser Microphone, New, Main
Audio-Technica AT4022 Small-Diaphragm Condenser Microphone, New, Main
This omnidirectional small-diaphragm condenser is a serious value! Capture transparent recordings with a flat frequency response all the way down to 20 Hz.

The low-profile AT4022 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. With a flat, extended frequency response and wide dynamic range ideal for critical studio and live applications, the AT4022 handles high SPLs with ease. The microphone's omnidirectional polar pattern preserves the "sound" of the recording location, delivers flat response and freedom from proximity effect. Its low-mass diaphragm improves transient response and reduces handling/mechanical noise transfer.

Features:

- Outstanding performance and rugged construction, ideal for critical studio & live applications
- High SPL handling and wide dynamic range
- Flat, extended frequency response
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Omnidirectional polar pattern provides maximum ambient pickup
- Low self noise perfectly suited for digital recording equipment
- Exceptional reproduction of low frequency sounds
- Low-mass element for superb transient response

Element: Fixed-charge back plate, permanently polarized condenser

Polar Pattern: Omnidirectional

Freq. Response: 20-20,000 Hz

LF Roll-Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa

Impedance: 250 ohms

Max. Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D.;
156 dB SPL, with 10 dB pad (nominal)

Noise: 13 dB SPL

Dynamic Range: (typical): 133 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio: 81 dB, 1 kHz at 1 Pa

Phantom Power Requirements: 48V DC, 3.0 mA typical

Switches: Flat, roll-off;
10 dB pad

Weight: 124 g (4.4 oz)

Dimensions: 144.0 mm (5.67 in.) long,
21.0 mm (0.83 in.) maximum body diameter

Output Connector: Integral 3-pin XLRM-type

Accessories Furnished: AT8405a stand clamp for 5/8 in.-27 threaded stands; windscreen; protective carrying case

Audio Technica Case Style: S1
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.25 lbs
Shipping Dimensions: 11 x 5 x 2 in
Manufacturer Part Number (MPN): AT4022

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Specification Sheet

Be the first to rate and review this product.

New

866-996-8637
Reserve Now
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to