Audio-Technica AT33PTG/II Dual Moving Coil Cartridge

Audio-Technica's AT33PTG/II utilizes a microlinear stylus with a small curvature radius to deliver low-distortion audio, even in the record's inner grooves.

The Audio-Technica AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality.

The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

Features

- Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction
- Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies
- Neodymium magnet and permendur yoke dramatically enhance the magnetic energy
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- High-separation, wide-response dual moving coil
- Strong, rigid housing limits unnecessary vibration
- Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Frequency Response: 15-50,000 Hz
- Channel Separation: 30 dB (1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Recommended Load Impedance: More than 100 ohms (when head amplifier is connected)
- Output: 0.3 mV (at 1 kHz, 5 cm/sec)
- Channel Balance: 0.5 dB (1 kHz)
- Stylus Shape: Microlinear
- Stylus Type: Nude square shank
- Cantilever: Gold-plated nude tapered boron
- Mount: Half-inch
- Accessories Included:
- Non-Magnetic Screwdriver
- 2 Washers
- 2 Nuts
- Cartridge Installation Screws (13 mm × 2, 19 mm × 2)
- Plastic Protector
- Brush
- PCOCC Lead Wire Set
- Stylus Curvature Radius: 2.2 x 0.12 mil
- Coil Impedance: 10 ohms (1 kHz)
- Coil Inductance: 22 µH (1 kHz)
- DC Resistance: 10 ohms
- Static Compliance: 40 x 10-6 cm/dyne
- Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz)
- Vertical Tracking Angle: 23°
- Dimensions: 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
- Weight: 6.9 g (0.24 oz)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 0.5 lbs
Shipping Dimensions: 4 x 4 x 2 in
Manufacturer Part Number (MPN): AT33PTG/2

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted January 12, 2021 by a customer from yahoo.com
"Incredible performance"
Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
Hello. I've only been listening to this cart for a few hours but It is blowing my mind. By far the best sounding cartridge I've owned and I've spent more. So smooth, detailed and accurate. I'm loving it!
5 of 5 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$599.00
  • 8 x
    $74.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to