Audio-Technica BPHS2a Dual-Ear Stereo Broadcast Headset


zZounds Gear Experts Say...
A-T added a hypercardioid dynamic microphone to their ATH-M60x headphones to make this headset -- a perfect fit for everyone from gamers to pro broadcasters.
Overview
Created especially for news and sports broadcasting, this rugged stereo headset offers highly intelligible and commanding vocal reproduction, along with a comfortable fit and excellent sound isolation. Its low-profile, closed-back, on-ear design is based on the ATH-M60x professional monitor headphones and includes the same 45 mm large-aperture drivers, and premium, memory foam earpads and headband, giving users a high-fidelity headset that's built to last. The headset's hypercardioid dynamic microphone keeps the pickup focused on the broadcaster's voice, even in loud environments, and is tailored to reproduce that voice with a rich, broadcast-ready sound. The microphone sits at the end of a rigid boom with a strong, flexible gooseneck section that allows the microphone to be easily adjusted and then stay in place. The boom is also designed to swivel forward and back so that the headset can be worn with the mic positioned on either the right or left side.
Available in two terminations:
- BPHS2a: XLR - mic, 6.3 mm (1/4") - Headphone
- BPHS2a-UT: Unterminated
- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Hypercardioid dynamic microphone with frequency response tailored for commanding, broadcast-ready vocal reproduction
- Carefully crafted using key metal components for lasting… read more durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement
read less
Available in two terminations:
- BPHS2a: XLR - mic, 6.3 mm (1/4") - Headphone
- BPHS2a-UT: Unterminated
Features:
- Low-profile, closed-back, on-ear design provides excellent isolation and fit- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Hypercardioid dynamic microphone with frequency response tailored for commanding, broadcast-ready vocal reproduction
- Carefully crafted using key metal components for lasting… read more durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement
Specs
Microphone
-Element: Dynamic
-Polar Pattern: Hypercardioid
-Frequency Response: 50 - 14,000 Hz (@ 2 cm)
-Open Circuit Sensitivity: -57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz)
-Dimensions: Height: 18.0 mm (0.71"),
-Main unit maximum diameter: 23.4 mm (0.92")
-Output Connector: TB6M
Headphone
-Type: Closed-back Dynamic
-Driver Diameter: 45 mm (Headphone)
-Frequency Response: 15-28,000 Hz (Headphone) 50-14,000 Hz (Microphone)
-Maximum Input Power: 1,600 mW at 1 kHz (Headphone)
-Maximum Output: 1,600 mW
-Sensitivity: 102 dB (Headphone) -57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
-Impedance: 38 ohms (Headphone) 550 ohms (Microphone)
-Weight: 250 g (8.8 oz)
-Cable: Detachable 3.0 m (9.8') long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8") phone plug (headphone) outputs
-Connector: TB6M jack
-Magnet: Neodymium (Headphone)
-Voice Coil: Copper-clad aluminum wire
-Accessories Included: Pouch; 3 windscreens; cable clip; 6/3 mm (1/4") screw-on adapter
-Element: Dynamic
-Polar Pattern: Hypercardioid
-Frequency Response: 50 - 14,000 Hz (@ 2 cm)
-Open Circuit Sensitivity: -57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz)
-Dimensions: Height: 18.0 mm (0.71"),
-Main unit maximum diameter: 23.4 mm (0.92")
-Output Connector: TB6M
Headphone
-Type: Closed-back Dynamic
-Driver Diameter: 45 mm (Headphone)
-Frequency Response: 15-28,000 Hz (Headphone) 50-14,000 Hz (Microphone)
-Maximum Input Power: 1,600 mW at 1 kHz (Headphone)
-Maximum Output: 1,600 mW
-Sensitivity: 102 dB (Headphone) -57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
-Impedance: 38 ohms (Headphone) 550 ohms (Microphone)
-Weight: 250 g (8.8 oz)
-Cable: Detachable 3.0 m (9.8') long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8") phone plug (headphone) outputs
-Connector: TB6M jack
-Magnet: Neodymium (Headphone)
-Voice Coil: Copper-clad aluminum wire
-Accessories Included: Pouch; 3 windscreens; cable clip; 6/3 mm (1/4") screw-on adapter
- Dimensions and Weight in Packaging
- BPHS2aUT, Unterminated Cables
- Shipping Weight: 1.55 lbs
- Shipping Dimensions: 10 x 9 x 4 in
- Manufacturer Part Number (MPN): BPHS2A-UT
- BPHS2a, With XLR and TRS Cables
- Shipping Weight: 1.9 lbs
- Shipping Dimensions: 9 x 9 x 4 in
- Manufacturer Part Number (MPN): BPHS2a
- Open Box (Like New), BPHS2a, With XLR and TRS Cables, USED
- Shipping Weight: 1.9 lbs
- Shipping Dimensions: 9 x 9 x 4 in
- Manufacturer Part Number (MPN): BPHS2a
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
BPHS2a, With XLR and TRS Cables, USED, Open Box (Like New)
What is USED, Open Box (Like New)?
$311.95
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.