AKG Super Drum Microphone Package (D550, 2xD440, 2xD660S in a Case)

No longer available at zZounds
zZounds Gear Experts Say...
Includes 5 mics, case, and accessories.

The D550 is a cardioid dynamic microphone, designed primarily as a bass instrument microphone for rough onstage use on bass drum, tuba, trombone, bass amps, etc. The wide frequency response of the D550 that slightly favors the low frequency and treble ranges ensures a very powerful sound and good intelligibility.

The D440 (2 included) is a cardioid dynamic microphone, designed primarily as an instrument microphone for rough onstage use on percussion instruments, guitar amps, wind instruments, etc. The wide frequency response of the D440 that slightly favors the midfrequency and treble regions ensures good intelligibility.

The D660 (2 included) dynamic microphone has been developed specifically for miking speech, vocals, and instruments on stage, and for karaoke and home recording applications. The transducer element of the D660 has been designed for use with both sound reinforcement systems and cassette or home studio recorders.

D550
Transducer Principle Dynamic: pressure gradient microphone

Frequency Range: 20 Hz to 20kHz

Polar Pattern: cardioid

Sensitivity at 1000 HZ: 2.5 mV/Pa (-52 dBV) re 1V/Pa

Equivalent Noise Level: 18 dB(A) (DIN 45412)

Maximum SPL FOR 1% (3%) THD: 147 dB (156 dB SPL)

Signal/Noise Ratio (A-Weighted): 76dB (A)

Electrical Impedance: <600 ohms

D440
Transducer Principle: Dynamic pressure gradient microphone

Frequency Range: 60 Hz to 20kHz

Polar Pattern: cardioid

Sensitivity at 1000 HZ: 2.5 mV/Pa (-52 dBV) re 1V/Pa

Equivalent Noise Level: 18 dB(A) (DIN 45412)

Maximum SPL FOR 1% (3%) THD: 147 dB (156 dB SPL)

Signal/Noise Ratio (A-Weighted): 76dB (A)

Electrical Impedance: <2000 ohms

Recommended Load Impedance: >2000 ohms

Connector: 3 pin mini-XLR

Cable Length: 1.5 m (5ft.)

Finish: matte black enamel

D660
Transducer Principle: Dynamic pressure gradient microphone

Frequency Range: 70 Hz to 20kHz

Polar Pattern: hypercardioid

Sensitivity at 1000 HZ: 2.0 mV/Pa (-54 dBV) re 1V/Pa

Equivalent Noise Level: 20 dB(A) (DIN 45412)

Maximum SPL FOR 1% (3%) THD: 140 dB (150 dB SPL)

Signal/Noise Ratio (A-Weighted): 74dB (A)

Electrical Impedance: <500 ohms

Recommended Load Impedance: >1200 ohms

Connector: 3 pin mini-XLR

Cable Length: 1.5 m (5ft.)

Finish: matte black enamel

For support or warranty questions, please contact the manufacturer:
Phone: 818-920-3212

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer