AKG C 5 Cardioid Condenser Handheld Vocal Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Main
AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Main
AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Graphs
AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Graphs
AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Main AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Main AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Graphs AKG C 5 Cardioid Condenser Handheld Vocal Microphone, Graphs
Cut through the mix onstage with AKG's C 5 handheld condenser microphone. This vocal mic's rugged spring-steel wire mesh grille stands up to live use.

This professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems.

The gold-plated transducer case does not only give the microphone a sophisticated aesthetic touch, but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.

Features:

- XLR connector module with 24-carat gold plated pins
- 24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
- Spring steel wire-mesh grill for extreme ruggedness including reliable control of pops and wind noise
- Shock mount

Polar pattern: Cardioid

Frequency range: 65 Hz to 20 kHz

Sensitivity: 4 mV/Pa (-48 dBV )

Max. SPL: 140 / 145 dB SPL (for 1% / 3% THD)

Equivalent noise level: 25 dB-A

Signal/noise ratio (A-weighted): 69 dB

Impedance: <= 200 ohms

Recommended load impedance: >= 2.000 ohms

Current consumption: typ. 4.3 mA

Power requirement: 9 to 52V phantom power to DIN 45596

Connector: 3-pin XLR

Finish: matte grayish blue

Net weight: 345 g (12.2 oz.)

Shipping weight: 660 g (1.5 lbs.)

For support or warranty questions, please contact the manufacturer:
Phone: 818-920-3212
User's Manual

Reviewers gave this product an overall rating of 5 out of 5 stars. (10 ratings)
Submitted November 28, 2012 by a customer from ymail.com

"Sweet Water"

Overall: 5 out of 5 stars
(see rating details)
At first I try to find a mic to replacing the beta 58a and got this mic while its on sale! Test it out and loving it !!!
Sound
It has a clean clarity and warm sound and very good in back ground noise rejection. Furthermore, Its have a very high gain and I could compare this to the Encore 300 !
Features
Handling noise is so low that its nearly none existence! and really good in rejecting the surround noise/sound.
Ease of Use
The sound is good just straight out of the box but if you play a little bit on the mixer EQ its even produce a more bright and sonic sound!
Quality
Very well make not as heavy as the beta 58a but just right to hold and its XLR is alot more secure than the beta 58a!
Value
This mic could be compare to that of the Blue Encore 300!
Manufacturer Support
Have not need to deal for support!
6 of 6 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer