Audient ID22 USB Audio Interface
Build a pro desktop studio around this 96 kHz USB audio interface! The Audient iD22 offers 2 mic preamps, 6 analog outs, ADAT I/O, monitor control and more.
The Audient iD22 transforms your DAW into a world-class recording system by connecting directly to your microphones, computer and monitors. Audient's focus is on producing the very best audio quality while keeping all of the functions simple and intuitive - enabling you to concentrate on the creative process.
BEAUTIFULLY SIMPLE MIXER APP
All the internal routing, mixing and configuration of iD22 can be done within the iD22 mixer app. You can even label your channels 'console-tape' style for that authentic Audient experience! As well as being easy on the eye, the mixer app is designed to keep out of your way and let the music be the prime focus.
- 2-in, 6-out high performance 24-bit/96kHz AD/DA converters
- 2 superb class-A mic preamplifiers & 1 discrete JFET instrument input
- Fully balanced insert points for integrating outboard gear
- High current headphone amplifier fed by an independent DAC
- Low latency DSP mixer for artist mixes
- Main and alternative stereo outputs
- User defined monitoring functionality with hardware control
- USB2.0 class compliant connectivity - Mac OS10.6.8 or later
- Multi-application ASIO and WDM drivers for Windows 7 and later
read less
PRISTINE CONVERTER TECHNOLOGY
iD22 provides two analog inputs and six analog outputs, these are driven by high quality 24-bit/96kHz convertors. Through months of tests Audient optimized component selections and circuit topologies to obtain every last ounce of convertor performance. The results are simply stunning - pin sharp stereo imaging, a fast low end with an impeccably detailed and smooth top end.WORLD CLASS MIC PRES
iD22 provides two classic Audient microphone preamplifiers - the same pre amps that have become renowned with over 50,000 channels in use worldwide. This hybrid design utilizes a class-A front end to provide clean and musical characteristics that sound stunning on any session. iD22 has the best mic preamp found on any audio interface and instantly provides a platform to produce outstanding recordings. Both input channels have a pad to handle hot levels, phantom power for condenser microphones, a high pass filter to remove unwanted low frequencies and a polarity switch to help you phase align your inputs. Channel two features a discrete JFET DI input for you guitars, synths and other instruments.GROWS WITH YOUR NEEDS
iD22 is more than just a… read more two in, six out interface. As your system grows iD22 can be expanded via the optical input and output connectors, supporting both ADAT and SPDIF. When tracking drums you can expand up to ten inputs via an eight-channel mic pre such as our ASP880 into the iD22 via ADAT. When working with your favorite outboard reverb, this can be connected in stereo via S/PDIF and integrated via the mixer app offering you a practical and flexible desktop package.FULLY BALANCED INSERTS
The two fully balanced insert points give you the chance to add your processing prior to conversion. Insert your favorite compression and EQ to build vocal chains that rival the very best. The insert return also gives you direct access to the analogue to digital converters - providing the cleanest signal path possible, making it great for print-backs or integrating outboard line level sources.CONSOLE STYLE MONITOR CONTROL
iD22 has built-in console style monitor control functions - Mono, polarity, dim, cut, speaker switching, talkback & cue mix monitoring. This makes iD22 the first audio interface that truly is the hub of a studio. You can assign any input channel to be the talkback source from the mixer app, and feed it straight into the two cue mixes.BEAUTIFULLY SIMPLE MIXER APP
All the internal routing, mixing and configuration of iD22 can be done within the iD22 mixer app. You can even label your channels 'console-tape' style for that authentic Audient experience! As well as being easy on the eye, the mixer app is designed to keep out of your way and let the music be the prime focus.
BUILT TO LAST
Quality deserves protection and iD22 has been designed to last. Its all-metal construction, machined aluminum knobs and toggle switches will stand up to countless late nights in the studio and days on the road.Features:
- 10-in, 14-out Desktop Interface- 2-in, 6-out high performance 24-bit/96kHz AD/DA converters
- 2 superb class-A mic preamplifiers & 1 discrete JFET instrument input
- Fully balanced insert points for integrating outboard gear
- High current headphone amplifier fed by an independent DAC
- Low latency DSP mixer for artist mixes
- Main and alternative stereo outputs
- User defined monitoring functionality with hardware control
- USB2.0 class compliant connectivity - Mac OS10.6.8 or later
- Multi-application ASIO and WDM drivers for Windows 7 and later
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
MICROPHONE PREAMPLIFIERS:
- MIC GAIN: -10 to +60 dB (-10dB Pad)
- LINE GAIN: -20 to +40 dB (-10dB Pad)
- PHANTOM POWER: 48v +/-4v @ 10mA/Channel
- MIC EIN: <-125dBu
- CMRR: >80dB @ 1 kHz
- MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad)
- INPUT IMPEDANCE (Mic): >3kOhm Balanced
- INPUT IMPEDANCE (Line): >10kOhm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to 100 kHz
- CROSSTALK: <-90dBu @ 1 kHz & 10 kHz
- THD+N @ 0dBu (1 kHz): 0.0015% (-96dBu)
- SNR: 96dB
- HPF: -3dB @ 100Hz, 2nd Order (12dB/Octave)
- XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
D.I (Channel 2):
- D.I GAIN: -16 to +54 dB (-10dB Pad)
- MAXIMUM INPUT LEVEL: +16dBu (typical), +22dBu
- INPUT IMPEDANCE: 1MegOhm Unbalanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to 50 kHz
- THD+N @ 0dBu (1 kHz): <0.03% (-70dBu)
- SNR: 93dB
- 1/4" JACK: TIP (Hot) & SLEEVE (Shield)
INSERT SENDS (Mic Pre Out):
- MAXIMUM OUTPUT LEVEL: +22dBu
- OUTPUT IMPEDANCE: <100Ohm Balanced
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
- POWER SUPPLY: 12VDC Centre Positive DC Adapter - >1.5Amps
ADC LINE INPUTS (Insert Returns):
- MAXIMUM INPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- INPUT IMPEDANCE: >10kOhm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to Fs/2
- CROSSTALK: -100dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.002% (-94dB)
- THD+N @ -6dBFS (1 kHz): <0.0015% (-97dB)
- DYNAMIC RANGE: 117dB un-weighted, 120dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
DAC OUTPUTS (1-4):
- MAXIMUM OUTPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- OUTPUT IMPEDANCE: <100Ohm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
- CROSSTALK: -110dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.0008% (-101dB)
- DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
HEADPHONE OUTPUT (5&6):
- MAXIMUM OUTPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- OUTPUT IMPEDANCE: <50Ohm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
- CROSSTALK: -110dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.0008% (-101dB)
- DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
DIGITAL i/o:
- ADAT 8 CHANNELS: 44.1 - 48 kHz
- ADAT 4 CHANNELS: 88.2 - 96 kHz
- STEREO S/PDIF: 44.1 - 96 kHz
- USB: 2.0 HIGH SPEED
- No. of INPUT CHANNELS: 10 (2 Analogue, 8 Digital)
- No. of OUTPUT CHANNELS: 14 (6 Analogue, 8 Digital)
- iD DSP Mixer Roundtrip (in to out) Latency:
- 44.1 kHz: 1.43ms
- 48.0 kHz: 1.31ms
- 88.2 kHz: 0.719ms
- 96.0 kHz: 0.656ms
- DAW Playback Latency @ 32 Sample Buffer for Software Instrument Playback:
- 44.1 kHz: 3.166ms
- 96.0 kHz: 2.12ms
- DAW Roundtrip Software Monitoring Latency @ 32 Sample Buffer (in to out):
- 44.1 kHz: 6.33ms
- 96.0 kHz : 4.24ms
- MIC GAIN: -10 to +60 dB (-10dB Pad)
- LINE GAIN: -20 to +40 dB (-10dB Pad)
- PHANTOM POWER: 48v +/-4v @ 10mA/Channel
- MIC EIN: <-125dBu
- CMRR: >80dB @ 1 kHz
- MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad)
- INPUT IMPEDANCE (Mic): >3kOhm Balanced
- INPUT IMPEDANCE (Line): >10kOhm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to 100 kHz
- CROSSTALK: <-90dBu @ 1 kHz & 10 kHz
- THD+N @ 0dBu (1 kHz): 0.0015% (-96dBu)
- SNR: 96dB
- HPF: -3dB @ 100Hz, 2nd Order (12dB/Octave)
- XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
D.I (Channel 2):
- D.I GAIN: -16 to +54 dB (-10dB Pad)
- MAXIMUM INPUT LEVEL: +16dBu (typical), +22dBu
- INPUT IMPEDANCE: 1MegOhm Unbalanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to 50 kHz
- THD+N @ 0dBu (1 kHz): <0.03% (-70dBu)
- SNR: 93dB
- 1/4" JACK: TIP (Hot) & SLEEVE (Shield)
INSERT SENDS (Mic Pre Out):
- MAXIMUM OUTPUT LEVEL: +22dBu
- OUTPUT IMPEDANCE: <100Ohm Balanced
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
- POWER SUPPLY: 12VDC Centre Positive DC Adapter - >1.5Amps
ADC LINE INPUTS (Insert Returns):
- MAXIMUM INPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- INPUT IMPEDANCE: >10kOhm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 10Hz to Fs/2
- CROSSTALK: -100dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.002% (-94dB)
- THD+N @ -6dBFS (1 kHz): <0.0015% (-97dB)
- DYNAMIC RANGE: 117dB un-weighted, 120dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
DAC OUTPUTS (1-4):
- MAXIMUM OUTPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- OUTPUT IMPEDANCE: <100Ohm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
- CROSSTALK: -110dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.0008% (-101dB)
- DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
HEADPHONE OUTPUT (5&6):
- MAXIMUM OUTPUT LEVEL: +18dBu
- DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
- OUTPUT IMPEDANCE: <50Ohm Balanced
- FREQUENCY RESPONSE: +/-0.5dB 5Hz to Fs/2
- CROSSTALK: -110dBu @ 1 kHz & 10 kHz
- THD+N @ -1dBFS (1 kHz): <0.0008% (-101dB)
- DYNAMIC RANGE: 110dB un-weighted, 114dB A-weighted
- 1/4" JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
DIGITAL i/o:
- ADAT 8 CHANNELS: 44.1 - 48 kHz
- ADAT 4 CHANNELS: 88.2 - 96 kHz
- STEREO S/PDIF: 44.1 - 96 kHz
- USB: 2.0 HIGH SPEED
- No. of INPUT CHANNELS: 10 (2 Analogue, 8 Digital)
- No. of OUTPUT CHANNELS: 14 (6 Analogue, 8 Digital)
- iD DSP Mixer Roundtrip (in to out) Latency:
- 44.1 kHz: 1.43ms
- 48.0 kHz: 1.31ms
- 88.2 kHz: 0.719ms
- 96.0 kHz: 0.656ms
- DAW Playback Latency @ 32 Sample Buffer for Software Instrument Playback:
- 44.1 kHz: 3.166ms
- 96.0 kHz: 2.12ms
- DAW Roundtrip Software Monitoring Latency @ 32 Sample Buffer (in to out):
- 44.1 kHz: 6.33ms
- 96.0 kHz : 4.24ms
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 4.5 lbs
- Shipping Dimensions: 13 x 9 x 4 in
- Manufacturer Part Number (MPN): ID22
(7 ratings)
Submitted October 27, 2016 by Dan Smith in Dillon, SC
"A great interface!"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I own the Tascam 1608 and the Presonus 1818VSL interfaces, and they both pale in comparison to my ID22. The output from this interface is more clear and precise than the other two interfaces. The unit is built solid. The preamps push my SM7B with no problem. The monitor routing is great as well since I use two sets of studio monitors when mixing. An overall great interface for the money.
Musical Background:
20+ years of playing music. I mainly concentrate now on recording local talent
Musical Style:
All forms of rock and metal...some blues
3 of 3 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
New
$499.00
-
6 x$83.17
-
4 x$124.75
On Backorder
Preorder Today
FREE -Day Shipping!
Get it
for
×
Get it by
if you order within
Faster Shipping
Shipping to
Related Accessories
Related Accessories
People who bought this item also bought
Items You Recently Viewed
