Xvive P58 Digital Wireless Guitar Pedal System

zZounds Gear Experts Say...

Cut the cord with Xvive P58, a 5.8 GHz system that integrates the receiver into a tuning pedal for easy, space-saving guitar wireless.

Overview

With the Xvive P58 Guitar Wireless System, you can roam free with your favorite guitar or bass -- and stay in tune -- without sacrificing tone. The receiver/tuner offers True Bypass and Buffered Bypass modes for optimizing your signal, and will also charge your transmitter!

The System

The P58 system includes the Transmitter, which connects to your audio source (typically an electric guitar or bass); and a combination Receiver / Tuner Pedal, which can be in the first position of your pedalboard, or can be placed alone between your instrument and your amp or sound interface. A 12V power supply for the Receiver/Tuner is also included.

Preserve Your Tone

The P58 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 110 decibels. Going wireless with the P58 system will not compromise your precious tone!

True or Buffered Bypass

The P58R Receiver/Tuner features a switch that allows you to choose either True Bypass mode, or Buffered Bypass mode. Buffered Bypass is a good choice if you use long cables and/or a lot of pedals between the A58 Receiver and your amp. If you want tonal purity and have a smaller setup, True Bypass is the way to go.

Integrated Tuner

The P58 Receiver integrates a high-precision A-440 digital tuner that is visible under bright stage lights or outside in the sun! In addition to showing you how in tune you are, the display indicates which… read more wireless channel is active and shows when the Mute is engaged and when the Transmitter and Receiver are successfully connected.

If necessary, you can connect your instrument to the Receiver/Tuner using a guitar cable. If you do, the A58 Receiver/Tuner will function only as a Tuner and its receiver module will be automatically disabled.

Auto Channel Selection

The 5.8 GHz wireless band is less crowded than 2.4 GHz, so you can trust that your signal will be clean and solid no matter how long your gig or rehearsal is. In addition, the P58R True Diversity Receiver scans the available six wireless channels and automatically selects the strongest one. This guarantees you a rock-solid wireless connection, every time!

Press and hold the channel button on the Receiver for 3 seconds to enter Channel Scan mode. The Receiver's channel LED will ash during scanning and then will stay on the optimal wireless channel. When scanning is complete, manually set the Transmitter's channel to be the same as the Receiver channel.

Active or Passive

The A58T Transmitter has a Mode switch that allows you to toggle between Active and Passive modes. If your guitar or bass has passive pickups, choose Passive mode. If you have have active or high-output pickups, the Active mode applies a -10 dB pad to the Transmitter's signal, preventing unwanted distortion and clipping and giving you a better-quality signal. When using a guitar or bass with active pickups, press and hold the Transmitter's Channel button for 3 seconds to turn on Active mode. When Active mode is on, the Active LED will illuminate.

Take Charge

The Receiver is powered by an included 12V DC adapter, or by any 9-12V DC (200 mA minimum) power source such as a pedalboard power supply. The Transmitter's internal rechargeable battery can be charged via USB-C by the Receiver/Tuner Pedal, or from any USB-C 5V/2A power source. Fully charging the Transmitter takes 2.5 hours and the charge lasts for 5 hours.

Your Transmitter can be charged by plugging it into the back of the Receiver, using a USB Type-C cable. In order to charge the Transmitter, the Receiver must be connected to a power outlet using a 12V 400mA or 9V 500mA adapter. Lower current may result in longer charging times.

If your transmitter runs out of power, you can pair your receiver with another A58 transmitter set to the same channel. Keeping a backup transmitter handy helps ensure that you will get through long gigs without running out of charge.

Features:

- 5.8 GHz guitar wireless system with A58 Transmitter and P58 Receiver / Tuner Pedal
- True Diversity Receiver with integrated chromatic tuner
- Transmitter has up to 5 hours of battery life
- Compatible with active and passive pickups
- Receiver scans for wireless status and selects the best channel
- High-resolution 24-bit / 48 kHz audio
- 12V DC power adapter included for receiver/tuner
- For guitar, bass and other musical instruments with a 1/4" output
- Toggle switch on Receiver for either True Bypass or Buffered Bypass
- Wireless range: up to 100 ft
- Less than 5 ms latency
- 6 wireless channels
- USB Type-C charging port on the Receiver/Tuner for charging the Transmitter
- Includes: Transmitter, Receiver/Tuner, USB charging cable, manual

Tuner Tips:

- The note you are tuning to is displayed in the middle in white
- Blue dots indicate that you are tuned flat, and need to tune up
- Red dots indicate that you are tuned sharp, and need to tune down
- A perfectly tuned note is indicated by a green circle in the center, with solid green dots on both sides.
- Chromatic Note Detection: C C# D D# E F F# G G# A A# B
- Default standard reference pitch (440 Hz)

Specs

WIRELESS SYSTEM
- Wireless Frequency Globe: 5730 - 5844MHz, Korea: 5729 - 5821MHz
- Working Range: >100 feet line-of-sight outdoors. Actual range depends on RF signal absorption, reflection and interference
- Audio Frequency Response: 20 Hz - 20 KHz (-3 dB)
- RF Sensitivity: -90 dBm
- Total Harmonic Distortion: 0.1%
- RF Output Power: 25 mW E.I.R.P. max
- Operating Temperature Range: 0 to 45 degrees C (Battery characteristics may limit this range)
- Channel Count Six: up to six A58 sets can be used simultaneously in one area
- Sample Rate: 24-bit / 48 KHz
- Dynamic Range: 110 dB
- Signal-To-Noise Ratio: 110 dB
- Latency: 5 ms

TRANSMITTER
- Battery Life: Up to 5 hours (3.8V rechargeable Li-ion, 780 mA)
- Transmitter Input Passive mode input: 2.84Vp-p, Active
- Maximum Level mode input: 7.5Vp-p, volume -10 dB
- Charging Voltage & Current (Transmitter): 5V / 500mA
- Impedance Input: 1 MOhm
- Input Connector: 1/4" / 6.5 mm TS jack
- Dimensions: 65 mm x 37 mm x 28 mm
- Weight: 45 g

RECEIVER
- Input & Output Connector: 1/4" / 6.5 mm TS jack
- Power supply: 12V 400mA or 9V 500mA
- Impedance Input: 100 KOhm Output: 100 Ohm
- Dimensions: 75 mm x 115 mm x 48 mm
- Weight: 390 g

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 1.47 lbs; Shipping Dimensions: 10 x 6 x 3 in; Manufacturer Part Number (MPN): P58

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.