Peavey PV115 Passive 2-Way PA Enclosure (1x15")

With amplified music, your sound is only as good as your loudspeakers. Carefully crafted mixes with custom-tweaked EQ's aren't going to matter if the speakers are lame. When you're ready to upgrade your PA system, nobody blends quality and value like Peavey. The PV115 loudspeaker is built like a tank, sounds fantastic, and priced to fit any tour budget.

Wide Frequency Range

As front-of-house mains, Peavey PV115s offer two-way performance across the full audio spectrum. They're capable of delivering a wide frequency range, from a low 46 Hz all the way up to 21 kHz, for bomb-dropping bass, glassy highs, and everything in between with accuracy and presence. Every instrument in the band can sit in its own zone in the mix, adding texture and detail to your music.

Big Bass

Where some loudspeakers only give you low-end boominess, the Peavey PV115's single 15-inch woofer reproduces lows and low-mids with punch and definition. Your audience will be able to lock-in with the beat much easier when they hear how tight the bass and drums are. Once the crowd is feeling the groove, they'll be ready to experience the full effect of the melody. It turns their typical evening out for live music into an unforgettable memory. Make sure you have extra sign-up sheets for the fan mailing list; you're gonna need them.

Natural High-End Response

High frequencies are pushed through Peavey's RX14 compression driver. The 1.4-inch titanium diaphragm in the PV115 produces natural, airy top-end to complement the tight rumble of the bass frequencies. Vocals are crisp and clear, and guitars and keyboards cut through the mix with precision. The RX14 has onboard overload protection to protect the tweeter from harm. This speaker is coupled with a 40 x 60-degree constant-directivity horn to disperse the highs throughout the room. Your audience can spread out across the dance floor, and they'll get the same great sound no matter where they stand. Peavey's 2.8 kHz crossover sends each frequency to the most efficient speaker for creamy smoothness across the entire midrange spectrum. No lumps in the response curve, just a nice, musical arc from top to bottom.

High-Volume Power Rating

Paired with a power amplifier or powered mixer, Peavey PV115 loudspeakers push out up to 118 dB SPL (sound pressure level). Rated at 400 Watts RMS with 800-watt peaks, you can fill any venue with music. The tweeter-horn's vertical orientation helps disperse sound widely even when the enclosures are set on the floor, and an integrated pole-socket is perfect for stand-mounting up high. The trapezoidal cabinet can also be tilted on its side for use as a floor monitor. Two 1/4-inch connections on each cabinet make for easy integration into any PA rig. Run them straight from your power source as mains or monitors, or daisy-chain multiple units to increase the coverage area. At this low price, you can outfit the whole stage.

Rugged, Tour-Worthy Construction

Working bands are constantly setting-up and breaking-down their PA systems. Night after night, city after city, it's an endless cycle of packing and unpacking. Seesawing temperatures and rough treatment will take its toll on all but the hardiest gear. Peavey enclosures are strong and rigid to stand up to the harshest road abuse. Heavy-duty carpet covers the cabinet, protecting the wood from scrapes and dings. A beefy metal grille spans the entire front baffle, shielding both the woofer and the tweeter from damage. It is powder-coated in black to keep a professional appearance, no matter how many times you drag it out of the van. Steel caps protect the corners, and thick steel handles make setup and transport a snap. With all its ruggedness, it only weighs 53 pounds. No one wants to go looking for a music store fifteen minutes before the gig. You can trust the PV115 to take you through every stop on the tour without a hiccup. zZounds is an authorized dealer of Peavey products.

- Frequency Response: 56 Hz to 20 kHz (-10 dB point on LF)
- Sensitivity: 96 dB (2.83V)
- Power handling: 400W program, 800W peak
- Dimensions (HxWxD): 31.75 x 18.38 front) x 14.25 inches
- Impedance: 8 ohms

Dimensions and Weight in Packaging

with Free Speaker Stand

Shipping Weight: 73 lbs

Base Item

Shipping Weight: 65 lbs

Shipping Dimensions: 35 x 21 x 17 in

Peavey PV115 Passive 2-Way PA Enclosure, 1x15"

Peavey proudly introduces new additions to its long-running PV Series, including mixers, equalizers, crossovers, loudspeakers and cables. The PV Series has long been the benchmark of performance and value in audio, and the new PV products live up to this legacy.

Features:

- 2-way trapezoidal sound reinforcement enclosures
- 15 in. premium, 2-3/8 in. voice coil woofer
- RX14 compression driver with a 1.4 in. titanium diaphragm 1 in. exit
- 90 degrees x 40 degrees constant directivity horn
- Tweeter protection
- Heavy-duty crossover
- Molded-in pole mounts
- Heavy-duty metal grille