The D6
The D6 is an American-made instrument microphone designed for live and studio performance. Characterized with a cardioid pick-up pattern and a frequency response of 30 Hz-15 kHz, the D6 is an ideal choice for kick drum, bass cabs, and other instruments requiring low frequency reproduction.
Transformerless design, low impedance, and balanced output allow interference-free performance even with long cable runs. The D6, a one-piece body precision machined from solid aluminum, consists of a durable hard coat anodized finish.
Applications
Live Stage-Coffee House to Stadium
Kick Drum, Floor Tom, Djembe, Cajon
Acoustic Bass, Electric Bass Cabs
Studio-Any Instrument Requiring Precise
Low Frequency Reproduction
7.7 oz / 217 grams
Finish Black Anodize
Supplied Accessories
Mic clip (MC2) adjustable through 180 degrees with standard 5/8 inch 27 thread.
Note: Metal stand adapter also supplied to accommodate European standard threads
Zippered microphone carrying pouch
The ADX51
The ADX51 is a pre-polarized condenser microphone designed to handle a wide
variety of live, studio and broadcast applications. Characterized with a cardioid pickup pattern and a smooth uniform response over a frequency range of 40-20k Hz, the ADX51 is precision machined from solid brass with a low reflective black e-coat finish.
The ADX51 is designed with low noise electronic circuitry, balanced output, and switches that enable a 10 dB pad and a bass roll-off. The ADX51 is road-worthy and capable of handling high sound pressure levels of 142dB.
Applications
Overhead for Drums / Percussion
Bells, cymbals, hi-hat, goodie table
Acoustic instruments
Guitar, piano, saxophone, orchestra (zone miking)
Group vocals
ADX51 may be used as a hanging mic or on a stand to pick up group vocals for ensemble, choirs or plays. Two mics may be positioned overhead or in front of the group, at a distance of 4-6 feet apart.
Supplied Accessories
Mic clip (Dclip) adjustable through 180 degrees with standard 5/8 in. -27 thread.
Note: Metal stand adapter also supplied to accommodate European standard threads.
Vinyl carrying case.
WS-81C External Foam Windscreen.
Technical Info
D6 Specifications
Transducer Type: Dynamic
Frequency Response: 30 Hz - 15 kHz
Polar Pattern: Cardioid
Output Impedance: 200 Ohms
Sensitivity: 2.2 mV @ 80Hz
Capsule Technology: VLM Type E
Off Axis Rejection: >20 db
Maximum SPL: 144 db
Cable/Connector: 3 pin gold plated male XLR connector
Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing: Machined Aluminum
Weight: 7.7 oz / 217 grams
Finish: Black Anodize
ADX51 Specifications
Transducer Type: Condenser (pre-polarized)
Frequency Response: 40 Hz - 18 kHz, 150 Hz - 18 kHz (with low cut filter)
Polar Pattern: Cardioid
Output Impedance: 100 Ohms balanced
Open Circuit Sensitivity: 15.9 mV (ref 1k @ 1 Pascal)
Equivalent Noise Level: 29 dB (A weighted)
Signal to Noise Ratio: 65 dB (ref 1k @ 1 Pascal)
Power Requirements: 9 - 52v phantom
Maximum SPL: 132 dB
Cable/Connector: 3 pin gold plated male XLR connector
Polarity: Positive voltage on pin, 2 relative to pin 3 of output XLR connector
Housing: Machined Brass
Weight: 5 oz/143 grams
Personal use items that are used at your mouth or in your ear cannot be returned once opened due to health laws. This includes all microphones, guitar talk boxes, ear plugs, and in-ear earphones. 
