Behringer UB1002FX Stereo Mixer with Effects

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Behringer UB1002FX Stereo Mixer with Effects, Main
Behringer UB1002FX Stereo Mixer with Effects, Main
zZounds Gear Experts Say...
10-input, 2-bus mic/line mixer, ultra low-noise design, 2 studio-grade mic preamps, 3-band EQ plus switchable low-cut filter

This 10-input, 2-bus mic/line mixer features 2 state-of-the-art Invisible Mic Preamps (IMPs) and an effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels. There is 1 post fader FX send per channel for external FX devices, main mix outputs plus separate control room, headphones and stereo tape outputs. Tape inputs are assignable to main mix or control room/phones outputs. This is an extremely versatile mixer with possibilities ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features
Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio

2 new state-of-the-art, studio-grade IMP 'Invisible' Mic Preamps with:
- 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
- Ultra-wide 60 dB gain range
- Lowest possible distortion 0.0007% (20 Hz - 20 kHz)

Integrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects

Effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels

10 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels

State-of-the-art 4580 operational amplifiers provide lowest noise and distortion, better than 4560 op amps

FX send control per channel for internal FX processor and/or as external send

Peak LEDs on all mono channels

Main mix outputs plus separate control… read more room, headphones and stereo tape outputs

CD/tape inputs assignable to main mix or control room/phones outputs

FX to control room function helps to monitor effects signal via headphones and control room outputs

Switchable +48 V phantom power for condenser microphones

Long-wearing 60 mm logarithmic-taper ALPS master fader and sealed rotary controls

External power supply for noise-free audio and superior transient response

Extremely rugged steel construction ensures long life even under the most demanding conditions

Conceived and designed by Behringer Germany read less

Mono Inputs
Microphone inputs
(IMP "Invisible Mic Preamp)

Type: XLR, electronically balanced, discrete input circuit

Mic EIN (20Hz - 20kHz):
- @ 0 Ohms Source Resistance: -134dB/135.7dB A-weighted
- @ 50 Ohms Source Resistance: -131dB/133.3dB A-weighted
- @ 150 Ohms Source Resistance: -129dB/130.5dB A-weighted

Frequency Response:
-1dB: <10Hz - 150kHz

Gain Range: +10 to +60dB

Maximum Input Level: +12dBu @ 10dB gain

Impedance (approx.): 2.6 kOhms balanced

Signal-to-Noise Ratio: 107dB/111dB A-weighted (0dBu In @ +22dB gain)

Distortion (THD+N): 0.005%/0.004% A-weighted

Line Input
Type: 1/4 in. TRS connector electronically balanced

Impedance (approx.):
- Balanced: 20kOhms
- Unbalanced: 10kOhms

Gain Range: -10 to +40dB

Maximum Input Level: +20dBu @ 0dB Gain

Fade Out Attenuation (Crosstalk Attenuation)
Main Fader Closed: 90dB

Channel Muted: 85dB

Channel Fader Closed: 88dB

Frequency Response
Microphone Input to Main Out
<10Hz - 80kHz: +0dB/-1dB
<10Hz - 137kHz: +0dB/-3dB

Stereo Inputs
Type: 1/4 in. TRS connector, electronically balanced

Impedance:
- Balanced: 20kOhms
- Unbalanced: 10kOhms
(+4dBu operating level)

-Balanced: approx. 20kOhms
-Unbalanced: 5kOhms
(-10dBV)

Maximum Input Level: +22dBu

EQ Mono Channels
Low: 80Hz, +/-15dB
Mid: 2.5 KHz, +/-15dB
High: 12kHz, +/-15dB

Audio Outputs
FX Sends
Type: 1/4 in. TS connector, unbalanced

Impedance: Approx. 120 Ohms

Maximum Output Level: +22dBu

Main Outputs
Type: 1/4 in. TRS connector, unbalanced

Impedance: Approx 120 Ohm

Maximum Output Level: +22dBu

Control Room Outputs
Type: 1/4 in. TS connector, unbalanced

Impedance: Approx. 120 Ohms

Maximum Output Level: +22dBu

Power
Mains Voltage: 120 V~, 60Hz, MXUL6 adapter

Physical
Dimensions: 1-5/6 x 7-2/5 x 8-2/3 in. (47 x 189 x 220 mm)

Weight (approx.): 2.31 lbs (1.05 kg)

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html
Manual
More Info
Spec Sheet

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (11 ratings)
Submitted December 4, 2005 by a customer from pgh1.com

"Great little FX mixer"

Overall: 4.5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I have been using this about 6 months now and don't think I would need to have anything more then this for a long time. Everything is great on this.
Sound
I am using this mixer in my small home studio - I have to say this is very good for the price - Even though I can do many of the FX with the computer being able to do them live is great. The sound quality coming out of the mixer is just as good as what I put in. I was using this to record live singing and I also do a podcast and use this to mix that as well. I have no issues with this mixer.
Features
I love the features and the fx that this mixer gives. The preamp is pretty good for all that I do with this and I am very satisified for the price that I paid.
Quality
very good quality - Good preamps that suit all the things I record and use this for.
Value
Extreemly good value and great quality for the price I paid for this mixer
Manufacturer Support
I am rating this ten as I didn't need to call for service but the manuals are so good.
The Wow Factor
Fun to play with and very "Sexy" to have sitting on my studio table looking impressive.

Musical Background:

Advanced Hobiest

Musical Style:

New Age, Rock
1 of 1 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer