
AKG P420 Perception High-Performance Multi-Pattern Condenser Microphone
Record in omni, cardioid or figure-8 with AKG's versatile multi-pattern condenser! Perfect for middle/side setups, this mic is a serious steal for the price.
$159.00
- No Credit Check6 x$26.50
- No Credit Check4 x$39.75
AKG Perception 820 Tube Studio Condenser Microphone
No longer available at zZounds



zZounds Gear Experts Say...
Fine tune your recording settings via remote control by choosing between 9 different pickup patterns on the AKG Perception 820 tube condenser mic.
Overview
The Perception 820 Tube delivers real tube sound quality. It is not only the flagship model of the Perception Series, but also raises the bar in its class of affordable tube microphones.
In contrast to many other affordable tube microphones, the Perception 820 Tube delivers real tube sound quality thanks to the dual one-inch large-diaphragm capsule and the sophisticated ECC 83 dual-triode circuitry.
The elegant remote control unit allows selection of 9 different pickup patterns and controls the switchable bass-cut filter and the attenuation pad. Moreover, a ground lift switch prevents unwanted hum if necessary.
It comes complete with a spider-type shock mount and a metal carrying case.
AKG's industry-leading Perception Series of condenser microphones are recognized for their outstanding quality and versatile capabilities at an affordable price.
The Perception 820 Tube raises the bar in its class: It shows real tube sound, the highest dynamic range, the most comprehensive features and comes complete with useful accessories at an unbeatable price.
- An ECC 83 dual-triode tube circuitry emphasizes even-order harmonics for rich, smooth and three-dimensional sound
- The elegant remote control unit allows selection of 9 different pickup patterns from omnidirectional to cardioid to figure 8
- The switchable bass cut filter (80 Hz, 12 dB/oct) reduces unwanted rumble or footfall noise
- A 20 dB… read more attenuation pad enables for high SPL applications up to 155 dB
- Brush-finished, anodized Aluminium front plate and all-metal housing for maximum shielding
- A ground lift switch prevents unwanted hum if necessary
- Designed and engineered in Vienna, Austria read less
In contrast to many other affordable tube microphones, the Perception 820 Tube delivers real tube sound quality thanks to the dual one-inch large-diaphragm capsule and the sophisticated ECC 83 dual-triode circuitry.
The elegant remote control unit allows selection of 9 different pickup patterns and controls the switchable bass-cut filter and the attenuation pad. Moreover, a ground lift switch prevents unwanted hum if necessary.
It comes complete with a spider-type shock mount and a metal carrying case.
AKG's industry-leading Perception Series of condenser microphones are recognized for their outstanding quality and versatile capabilities at an affordable price.
The Perception 820 Tube raises the bar in its class: It shows real tube sound, the highest dynamic range, the most comprehensive features and comes complete with useful accessories at an unbeatable price.
Features:
- Two back-to-back one-inch diaphragms featuring True Condenser Technology- An ECC 83 dual-triode tube circuitry emphasizes even-order harmonics for rich, smooth and three-dimensional sound
- The elegant remote control unit allows selection of 9 different pickup patterns from omnidirectional to cardioid to figure 8
- The switchable bass cut filter (80 Hz, 12 dB/oct) reduces unwanted rumble or footfall noise
- A 20 dB… read more attenuation pad enables for high SPL applications up to 155 dB
- Brush-finished, anodized Aluminium front plate and all-metal housing for maximum shielding
- A ground lift switch prevents unwanted hum if necessary
- Designed and engineered in Vienna, Austria read less
Specs
Specifications
Type: 1-inch dual-diaphragm, true condenser pressure gradient
Polar pattern: omnidirectional, cardioid, figure eight plus six intermediate patterns (selectable on Remote Control Unit)
Frequency range: 20 to 20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV +/-3 dB)
Max. SPL: 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent noise level: 16 dB-A (IEC 60268-4)
Preattenuation pad: -20 dB (switchable on Remote Control Unit)
Bass cut filter slope: 12 dB/Oktave, 80 Hz (switchable on Remote Control Unit)
Impedance: <=200 ohms
Recommended load impedance: >=1000 ohms
Powering: via Remote Control Unit
Connector: dedicated 7-pin male XLR
Dimensions: 53 dia. x 212 mm high (2 x 8.3 in.)
Net weight: 870 g / 1.9 lbs.
Remote Control Unit: Audio/control input: dedicated 7-pin female XLR connector
Audio output: standard 3-pin male XLR connector,balanced, pin 2 hot
Polar pattern selector: 9-position detented rotary switch
Bass cut filter switch: 2-position toggle switch
Preattenuation switch: 2-position toggle switch
Power voltage: 210-240 VAC or 110-120 VAC, selectable
Primary fuse: 125 mA / 250 V slow-blow
Type: 1-inch dual-diaphragm, true condenser pressure gradient
Polar pattern: omnidirectional, cardioid, figure eight plus six intermediate patterns (selectable on Remote Control Unit)
Frequency range: 20 to 20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV +/-3 dB)
Max. SPL: 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent noise level: 16 dB-A (IEC 60268-4)
Preattenuation pad: -20 dB (switchable on Remote Control Unit)
Bass cut filter slope: 12 dB/Oktave, 80 Hz (switchable on Remote Control Unit)
Impedance: <=200 ohms
Recommended load impedance: >=1000 ohms
Powering: via Remote Control Unit
Connector: dedicated 7-pin male XLR
Dimensions: 53 dia. x 212 mm high (2 x 8.3 in.)
Net weight: 870 g / 1.9 lbs.
Remote Control Unit: Audio/control input: dedicated 7-pin female XLR connector
Audio output: standard 3-pin male XLR connector,balanced, pin 2 hot
Polar pattern selector: 9-position detented rotary switch
Bass cut filter switch: 2-position toggle switch
Preattenuation switch: 2-position toggle switch
Power voltage: 210-240 VAC or 110-120 VAC, selectable
Primary fuse: 125 mA / 250 V slow-blow
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(12 ratings)
Submitted December 10, 2010 by a customer from gmail.com
"$9000 Sound Nearly Free"
Sound
I own the AKG C414 that I use a lot on major projects. But when I was looking to replace my Blue Bluebird that was my studio work horse I jumped at the fact that AKG made an affordable tube mic since I also own a Rode K2. The AKG has all the features and sound quality of mics that I have spent $3k or better on packed into a $700 price tag. I really like large 1" diaphragm mics but I love them when there a dual design. This mic is that. So you end up with a nice fat, round and in your face recording. The tube design only adds to this piece uniqueness. Giving you that rich warm harmonic tone a lot try to duplicate with plug-ins. If you're looking for that big high-end mic sound this is a steal. I'll put it up against any mic hands down. If it had a self-cooling system, my Sony C800 would be gathering a lot of dust.
Quality
Its the AKG craftsmanship that you know and love. Don't let the low price tag fool you. Attention to detail is packed in every micron of this mic.
Value
Let's just say you might want to buy this before AKG realizes the prize they're just giving away.
Manufacturer Support
Can't really say since I haven't needed yet.
Musical Background:
Recording Engineer - Producer
Musical Style:
Urban
21 of 21 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.