Xvive U3T Plug-On Dynamic Microphone Wireless Transmitter

Expand your Xvive U3 wireless system by adding an extra U3T microphone transmitter. This easy-to-use plug-on transmitter makes any dynamic mic wireless.

Overview

The Xvive U3T Microphone Wireless System Transmitter is a high-fidelity plug-and-play wireless transmitter for dynamic microphones, intended for use with a U3 Receiver. Transmit 24-bit / 48 kHz digital audio with low distortion, wide frequency response, and a stable 2.4 GHz wireless connection with a range of up to 90 feet.

Add the U3T to your existing Xvive U3 wireless system to make another wired microphone wireless!

Features:

- 2.4Ghz band wireless
- Less than 5ms Latency, Simultaneous broadcasts on 6 channels.
- Broad 20Hz - 20KHz frequency response
- Indoor range: Up to 90 feet (actual range depends on rf signal absorption, reflection and interference )
- 5 Hours of battery life (rechargeable battery for both Transmitter & Receiver)
- Works with XLR dynamic microphone and battery-powered condenser microphones.
- High Resolution 24-bit/48kpbs Audio
- Dynamic Range 110dB
- Signal to Noise Ratio is 110dB
- U3 wireless aims to take the complexity and frustration, out of traditional wireless microphone systems. Creating a flexible, all-in-one solution that makes any your favorite wired microphones into wireless.

Specs

- Dimensions: 31 x 29 x 98 mm
-Weight: 93g
-Housing: Molded Plastic and cast Metal
-Battery: 3.7V Rechargeable Li-lon, 860mA
-Impedance: Input 15KO(1KHz)
-Audio Input Connector: Balanced XLR male input
-Maximum Input Level:
-Mic mode: 2.8Vp-p
- Line mode: 7Vp-p
-Gain Adjustment Range: Two mode, Mic is 0dB, Line is -10dB
-Battery Life: Up to 5 hours
-Support microphone type: XLR dynamic microphone and battery-powered condenser microphones.
-Antenna Impedance: 50
-Antenna Type: 1/4 Wave Sleeve Dipole, non-removable
-Number of antenna: 1

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 0.46 lbs; Shipping Dimensions: 5 x 4 x 2 in; Manufacturer Part Number (MPN): U3T

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.