
Shure WL185M Low-Profile Cardioid Lavalier Microphone, TQG/TA4F Connector
Shure upgraded their WL185 cardioid lavalier mic to make it even smaller and better-sounding in the WL185m, available here with a 4-pin TA4F connector.
$153.00
- No Credit Check6 x$25.50
- No Credit Check4 x$38.25
Shure WL185 Cardioid TQG Lavalier Microphone
No longer available at zZounds

zZounds Gear Experts Say...
Focus on your sound source and maximize gain before feedback with this cardioid-pattern lav mic. The 4-pin TQG connector plugs into Shure wireless bodypacks.
Overview
The Shure WL185 is a lavalier electret condenser mic designed for use with a wireless body-pack transmitter. Each mic has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility.
WL185 (Cardioid): Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle: 130 degrees.
WL185 (Cardioid): Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise. Use of windscreen highly recommended. Pickup angle: 130 degrees.
Specs
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 ohms
- Sensitivity (1 Pa = 94 dB SPL): WL185: -45.5 dBV/Pa
- Maximum Sound Pressure Level: WL185: 130.5 dB SPL
- Output Noise (A-weighted): WL185: 28.0 dB SPL
- Dynamic Range: 102.5 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin of a Shure wireless microphone transmitter.
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 ohms
- Sensitivity (1 Pa = 94 dB SPL): WL185: -45.5 dBV/Pa
- Maximum Sound Pressure Level: WL185: 130.5 dB SPL
- Output Noise (A-weighted): WL185: 28.0 dB SPL
- Dynamic Range: 102.5 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin of a Shure wireless microphone transmitter.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.