RF Carrier Range: 470-937.5MHz, varies by region
Working Range: 328 ft (Note: Actual range depends on RF signal absorption, reflection and interference)
RF Tuning Step Size: 25 kHz, varies by region
Image Rejection: >70 dB, typical
RF Sensitivity: -97 dBm at 10-5 BER
Latency: <2.9 ms
Audio Frequency Response: 20 Hz - 20 kHz (+/-1 dB) (Dependent on microphone type)
Audio Dynamic Range (System Gain @ +10): >120 dB, A-weighted, typical
Total Harmonic Distortion (-12 dBFS input, System Gain @ +10): <0.1%
System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
Operating Temperature Range: -18C (0F) to 50C (122F) (Note: Battery characteristics may limit this range.)
Storage Temperature Range: -29C (-20F) to 74C (165F) (Note: Battery characteristics may limit this range.)
Battery Type Runtime:- (1) SB900 rechargeable battery: up to 10 hours*
- (2) Alkaline AA: up to 9 hours
*SB900 Rechargeable Battery and related power management accessories sold separately
QLXD4 Wireless Receiver:- Dimensions: 41 mm x 197 mm x 151 mm (1.63 in. x 7.75 in. x 5.94 in.), H x W x D
- Weight: 777 g (1.71 lbs), without antennas
- Housing: Steel
- Power requirements: 12 V DC @ 0.4 A, supplied by external power supply (tip positive)
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 O
- Gain Adjustment Range: -18 to +42 dB in 1 dB steps
Configuration: - 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance:- 1/4" (6.35 mm): 100 O (50 O Unbalanced)
- XLR: 100 O
Full Scale Output:- 1/4" (6.35 mm) +12 dBV
- XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Network Interface: Single Port Ethernet 10/100 Mbps
- Maximum Ethernet Cable Length: 100 m (328 ft)
QLXD1 Bodypack Transmitter:- Radio Frequency Range: 20 Hz - 20 kHz
- Rechargeable components: Yes
- Battery Requirements: 2 AA alkaline batteries or SB900 Lithium-Ion Rechargeable Battery
- Battery Life: Shure SB900 up to 10 hours, AA alkaline up to 9 hours
- Typical Operating Distance: 100 m (330 ft) line of sight
QLXD2 Handheld Transmitter:- Radio Frequency Range: 20 Hz - 20 kHz
- Rechargeable components: Yes
- Battery Requirements: 2 AA alkaline batteries or SB900 Lithium-Ion Rechargeable Battery
- Battery Life: Shure SB900 up to 10 hours, AA alkaline up to 9 hours
- Typical Operating Distance: 100 m (330 ft) line of sight
Handheld Microphone Options:QLXD2/SM58 Handheld Transmitter with SM58 Cartridge
QLXD2/SM86 Handheld Transmitter with SM86 Cartridge
QLXD2/SM87A Handheld Transmitter with SM87A Cartridge
QLXD2/BETA 58A Handheld Transmitter with Beta 58A Cartridge
QLXD2/BETA 87A Handheld Transmitter with Beta 87A Cartridge
QLXD2/BETA 87C Handheld Transmitter with Beta 87C Cartridge
QLXD2/KSM9 Handheld Transmitter with KSM9 Cartridge
QLXD2/KSM9HS Handheld Transmitter with KSM9HS Cartridge
- Dimensions and Weight in Packaging
- Band G50 (470 - 534 MHz)
-
Shipping Weight: 9.75 lbs
-
Shipping Dimensions: 20 x 18 x 4 in
-
Manufacturer Part Number (MPN): QLXD124/85-G50
- Band H50 (534 - 598 MHz)
-
Shipping Weight: 9.75 lbs
-
Shipping Dimensions: 20 x 18 x 4 in
-
Manufacturer Part Number (MPN): QLXD124/85-H50
- Band J50A (572 - 608 MHz)
-
Shipping Weight: 9.75 lbs
-
Shipping Dimensions: 20 x 18 x 4 in
-
Manufacturer Part Number (MPN): QLXD124/85-J50A
- Band V50 (174 - 216 MHz)
-
Shipping Weight: 10 lbs
-
Shipping Dimensions: 20 x 18 x 4 in
-
Manufacturer Part Number (MPN): QLXD124/85-V50