Shure GLXD24R/SM86 Wireless Handheld Microphone System

Trust your live vocals to this Shure GLX-D digital wireless system, including the handheld SM86 cardioid condenser microphone and GLXD4R rackmount receiver.
The Shure GLXD24R/SM86 Wireless Handheld Microphone System is part of the GLX-D Advanced wireless systems family. The Shure GLXD24R/SM86 provides intelligent battery rechargeability, robust RF performance, automatic frequency management and increased channel count with exceptional digital audio clarity and seamless operation. The industry-standard Shure SM86 vocal microphone capsule delivers warm, clear vocal reproduction.

Included with Shure GLXD24R/SM86 System

- Shure GLXD2/SM86 handheld transmitter with integrated SM86 cardioid condenser microphone capsule
- GLXD4R rack mount receiver
- Microphone clip
- SB902 Rechargeable lithium-ion battery
- USB Charge cable
- 2 Detachable antennas
- Rack mount hardware
- User guide
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
- Compatibility: Operate up to 9 compatible systems in typical setting, up to 11 maximum under ideal conditions
- System Operating Range:
- - Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
- - Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
- Transmit Mode: Shure Proprietary Digital
- Audio Frequency Response: 20 Hz - 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
- - Latency Groups 1 and A: 40 ms
- - Groups 2, 3, 4 and B: 73 ms
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 02%, typical
- RF Output Power: 10 mW EIRP max
- Operating Temperature Range: -18C (0F) to 57C (135F) Note: Battery characteristics may limit this range
- Storage Temperature Range: -29C (-20F) to 74C (165F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
- Battery Life: Up to 16 hours
- NOTE: All Specifications are subject to change Performance may vary depending on country regulations and operating environment

GLXD4R Rack Mount Receiver
- Dimensions 42 x 197 x 163 mm (17 x 78 x 64 in) H x W x D
- Weight: 9072 g (32 oz) without batteries
- Housing: Steel
- Power Requirements: 14 to 18 VDC (tip positive with respect to ring), 550 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -18 to 42 dB in 1 dB steps
- Phantom Power Protection: Yes
- Audio Output:
- - Configuration XLR Output Balanced: 635 mm (1/4") output Impedance balanced
- - Impedance XLR Output 100 O: 635 mm (1/4") output 100 O (50 O, Unbalanced)
- - Full-Scale Output XLR LINE setting= +18 dBV, MIC setting= -12 dBV: 635 mm (1/4") +12 dBV
- - Pin Assignments: XLR Output 1=ground, 2=hot, 3=cold; 635 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
- Mic/Line Switch: 30 dB Pad
- Receiver: Antenna Input
- Impedance: 50 O
- Antenna: Type 1/2 Wave Sleeve Dipole
- Maximum Input Level: -20 dBm

GLXD2 Handheld Transmitter
- Dimensions: SM86 49 mm, 19 in 252 mm, 99 in 37 mm, 15 in
- Weight: SM86 275 g (91 oz) without batteries
- Housing: Molded Plastic
- Power Requirements: 37 V Rechargeable Li-Ion
- RF Output Power: 10 mW EIRP max
- Maximum Input Level: 145 dB SPL

Dimensions and Weight in Packaging
Z2, 2400-2483.5 MHz
Shipping Weight: 7.25 lbs
Shipping Dimensions: 19 x 15 x 4 in
Manufacturer Part Number (MPN): GLXD24R/SM86-Z2
Warehouse Resealed, Z2, 2400-2483.5 MHz
Shipping Weight: 7.5 lbs
Shipping Dimensions: 19 x 15 x 4 in
Manufacturer Part Number (MPN): GLXD24R/SM86-Z2
For support or warranty questions, please contact the manufacturer:
Phone: (800) 516-2525
Email: service@shure.com