sE Electronics X1 A Large-Diaphragm Condenser Microphone







zZounds Gear Experts Say...
Prepare to be impressed -- the sE X1 A stacks up against much more expensive mics! Capture vocals, voiceover, guitar, and more with this workhorse condenser.
Overview
With a specially designed condenser capsule and an exterior based on the rugged metal chassis of the X1, the X1 A offers first-class sound & specifications at an even better "home studio" cost, featuring an extremely natural frequency response, massive SPL-handling capabilities (150 dB!), switchable attenuation and low-cut filters, and a perfectly balanced sensitivity level -- so it's at home on absolutely any source.
The X1 A is an entry-level cardioid 2/3" permanently-biased condenser microphone with all-metal housing, integrated windscreen, and gold plated XLR connectors. It has a -20db attenuation pad and 100 Hz low cut switch, and includes a swivel mic clip and mic stand thread adapter.
The X1 A is an entry-level cardioid 2/3" permanently-biased condenser microphone with all-metal housing, integrated windscreen, and gold plated XLR connectors. It has a -20db attenuation pad and 100 Hz low cut switch, and includes a swivel mic clip and mic stand thread adapter.
Specs
- Capsule Type: 2/3" Permanently-Biased Condenser
- Directional Pattern: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Impedance: <50 Ohms
- Sensitivity: 20 mV/Pa (-34 dB)
- Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
- Signal to Noise Ratio: 78 dB(A)
- Equivalent Noise Level: 16 dB(A)
- Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
- Low Cut Filter: 100 Hz, 6 dB/oct, switchable
- Attenuation Pad: 20 dB, switchable
- Connectivity: 3-pin male XLR
- Power requirement: 48V phantom according to IEC 61938
- Recommended Load Impedance: >1K Ohms
- Current Consumption: 4.0 mA
- Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
- Weight: 390 g / 13.8 oz
- Directional Pattern: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Impedance: <50 Ohms
- Sensitivity: 20 mV/Pa (-34 dB)
- Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
- Signal to Noise Ratio: 78 dB(A)
- Equivalent Noise Level: 16 dB(A)
- Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
- Low Cut Filter: 100 Hz, 6 dB/oct, switchable
- Attenuation Pad: 20 dB, switchable
- Connectivity: 3-pin male XLR
- Power requirement: 48V phantom according to IEC 61938
- Recommended Load Impedance: >1K Ohms
- Current Consumption: 4.0 mA
- Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
- Weight: 390 g / 13.8 oz
- Dimensions and Weight in Packaging
- Black
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 11 x 5 x 4 in
- Manufacturer Part Number (MPN): X1-A-U
Black
$99.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.