Rode smartLav+ Lavalier Microphone for iOS




zZounds Gear Experts Say...
Record dialogue directly to your iOS device. This Rode clip-on omni lavalier mic has a 1/8" TRRS plug that connects to your iPhone or iPad's headphone jack.
Overview
The Rode smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.
With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RODE Rec app for iOS, or any other audio app of their choice.
By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.
A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar(R) reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.
The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RODE's RODE Rec app for Apple iOS devices. RODE Rec turns the user's iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
- Compatible with iOS devices and select Android devices -- see smartlav.com for a list of compatible devices
- Operates in conjunction with RODE Rec app
- Discrete 4.5mm miniature microphone
- Omni-directional condenser capsule
- Removable water resistant pop filter
- Including Lavalier mounting Clip and Pouch
- Designed in Australia
- Kevlar reinforced cable
read less
With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RODE Rec app for iOS, or any other audio app of their choice.
By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.
A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar(R) reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.
The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RODE's RODE Rec app for Apple iOS devices. RODE Rec turns the user's iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
Features:
-… read more Professional Lavalier Mic with TRRS Jack- Compatible with iOS devices and select Android devices -- see smartlav.com for a list of compatible devices
- Operates in conjunction with RODE Rec app
- Discrete 4.5mm miniature microphone
- Omni-directional condenser capsule
- Removable water resistant pop filter
- Including Lavalier mounting Clip and Pouch
- Designed in Australia
- Kevlar reinforced cable
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Acoustic Principle: Permanently Polarised Condenser
- Active Electronics: JFET
- Polar Pattern: Omni-directional
- Frequency Range: 60 Hz - 18 KHz
- Output Impedance: 3k OHM Typical
- Signal To Noise Ratio: 67 dB
- Equivalent Noise: 27 dB Typical
- Clipping SPL: 110 dB
- Maximum Output: 189 mV
- Sensitivity: -35dB (17.8mV @94dB SPL)
- Dynamic Range: 83dB Typical
- Power Requirements: Powered from iPhone TRRS socket (2.7V)
- Output Connection: Gold-plated TRRS plug
- Active Electronics: JFET
- Polar Pattern: Omni-directional
- Frequency Range: 60 Hz - 18 KHz
- Output Impedance: 3k OHM Typical
- Signal To Noise Ratio: 67 dB
- Equivalent Noise: 27 dB Typical
- Clipping SPL: 110 dB
- Maximum Output: 189 mV
- Sensitivity: -35dB (17.8mV @94dB SPL)
- Dynamic Range: 83dB Typical
- Power Requirements: Powered from iPhone TRRS socket (2.7V)
- Output Connection: Gold-plated TRRS plug
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.11 lbs
- Shipping Dimensions: 5 x 3 x 1 in
- Manufacturer Part Number (MPN): SMARTLAV +
- Open Box (Very Good)
- Shipping Weight: 0.11 lbs
- Shipping Dimensions: 5 x 3 x 1 in
- Manufacturer Part Number (MPN): SMARTLAV +
- Open Box (Like New)
- Shipping Weight: 0.11 lbs
- Shipping Dimensions: 5 x 3 x 1 in
- Manufacturer Part Number (MPN): SMARTLAV +
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
New
$79.00
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.