Rode HS1 Headset Condenser Microphone
No longer available at zZounds







zZounds Gear Experts Say...
Depend on the inconspicuous Rode HS1 headset microphone to provide clear audio, with a comfortable, lightweight design that's perfect for live presenters.
Overview
Whether you're presenting for television or live on-stage; in a 20,000 seat auditorium or in a house of worship, Rode has all your audio requirements covered with the reliable and intuitive HS1 headset. Featuring the pure, clear audio and low handling noise that Rode is celebrated for, the HS1 is built to deliver and to last.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra-lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
Knowing that versatility is paramount in any product, Rode has developed the MiCon connector system which provides seamless integration between all of Rode's compact wearable microphones and a wide range of wireless systems.
Visit the MiCon product page for a full list of available adaptors and the supported devices.
Rode has always offered industry leading warranty and after sales service on its products, and the HS1 is no exception, offering an innovative five year warranty that gives you total piece of mind for five years after purchase.
Included Accessories
- Anti-trauma storage case
- Water resistant pop filter
- Mini-furry
- Shielded detachable Kevlar reinforced cable
- Lapel style cable management clip
- Adjustment tools
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra-lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
Knowing that versatility is paramount in any product, Rode has developed the MiCon connector system which provides seamless integration between all of Rode's compact wearable microphones and a wide range of wireless systems.
Visit the MiCon product page for a full list of available adaptors and the supported devices.
Rode has always offered industry leading warranty and after sales service on its products, and the HS1 is no exception, offering an innovative five year warranty that gives you total piece of mind for five years after purchase.
Included Accessories
- Anti-trauma storage case
- Water resistant pop filter
- Mini-furry
- Shielded detachable Kevlar reinforced cable
- Lapel style cable management clip
- Adjustment tools
Specs
Power:
- Minimum 2V, Maximum 5V through MiCon wireless adaptors
- 48v phantom power through MiCon XLR adaptor
Acoustic Principle: Permanently polarised condenser
Directional Pattern: Omni-directional
Frequency range: 60Hz - 18kHz
Output impedance: 3k ohms Typical
Signal noise ratio: 69dB
Equivalent noise: 25dBA SPL (per IEC651)
Maximum SPL: 110dB (clipping SPL)
Maximum output voltage: 189mV (Calc. from max SPL peak before clip)
Sensitivity: -33.5dB re 1 V/Pa (21mV at 94dB SPL) +/- 3dB at 1kHz
Weight: 6.5gm
Dimensions(HxWxD): 65 x 140 x 200 mm
- Minimum 2V, Maximum 5V through MiCon wireless adaptors
- 48v phantom power through MiCon XLR adaptor
Acoustic Principle: Permanently polarised condenser
Directional Pattern: Omni-directional
Frequency range: 60Hz - 18kHz
Output impedance: 3k ohms Typical
Signal noise ratio: 69dB
Equivalent noise: 25dBA SPL (per IEC651)
Maximum SPL: 110dB (clipping SPL)
Maximum output voltage: 189mV (Calc. from max SPL peak before clip)
Sensitivity: -33.5dB re 1 V/Pa (21mV at 94dB SPL) +/- 3dB at 1kHz
Weight: 6.5gm
Dimensions(HxWxD): 65 x 140 x 200 mm
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
Phone: 562-364-7400
Web: https://rode.com/en/support/contact
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.