Rolls Bellari SE560 Sonic Exciter
No longer available at zZounds



zZounds Gear Experts Say...
Get more oomph out of your speakers with the Rolls Bellari SE560, a sonic exciter that lets you adjust "bottom" and "definition" for a richer, clearer sound.
Overview
The Rolls Bellari SE560 Sonic Exciter (sound enhancer) excels whether you are using it as a phono enhancer or for sending music to your amplifier or preamp. At every design stage, Rolls Bellari spent a considerable amount of time focused on one thing: sound quality.
The SE560 Sonic Exciter can be used in many places for audio improvement. It can be used as a stand-alone preamplifier. With 19.1 dB of gain, it has more output potential than most preamps. Simply plug your source (phone, tablet, DAC, Phono Pre or other player) into the SE560 and from there to your amplifier. With its two inputs, it can act almost like a two-channel preamp.
What will the Sonic Exciter do?:
- It will take your speakers (whatever the price) and make them sound like speakers that are four times the cost.
- It will make your phono cartridge sound like one of those you read about in magazines.
- It can fill the role of a turntable cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. In this application you can adjust for DECCA levels (hot mastered records) or standard to low-level records with ease just by using the Volume control.
- It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier.
Any way you choose, it will sound like you had pillows covering your speakers before you used the SE560.
Where to set the Bottom and Definition?… read more The simple answer is where ever you feel your system sounds best. Rolls Bellari suggests starting with the Bottom and Definition controls two to three dots/notches past the "0" (half way up) indicator. read less
The SE560 Sonic Exciter can be used in many places for audio improvement. It can be used as a stand-alone preamplifier. With 19.1 dB of gain, it has more output potential than most preamps. Simply plug your source (phone, tablet, DAC, Phono Pre or other player) into the SE560 and from there to your amplifier. With its two inputs, it can act almost like a two-channel preamp.
What will the Sonic Exciter do?:
- It will take your speakers (whatever the price) and make them sound like speakers that are four times the cost.
- It will make your phono cartridge sound like one of those you read about in magazines.
- It can fill the role of a turntable cartridge only improvement in your system. From your phono pre (or directly from your turntable if it has a phono pre built in) to the SE560 then to your preamp or power amp. In this application you can adjust for DECCA levels (hot mastered records) or standard to low-level records with ease just by using the Volume control.
- It also can act as a whole system enhancer by plugging your preamp into the SE560 then to your amplifier.
Any way you choose, it will sound like you had pillows covering your speakers before you used the SE560.
Where to set the Bottom and Definition?… read more The simple answer is where ever you feel your system sounds best. Rolls Bellari suggests starting with the Bottom and Definition controls two to three dots/notches past the "0" (half way up) indicator. read less
Specs
- Gain: 19.1 dB gain @ 1kHz
- Input Impedance: 1k
- Output Impedance: 100 ohms RCA
- Frequency Response: 3Hz to 31kHz
- THD: .003% @ 1KHz
- S/N Ratio: >100 dB unweighted
- Size: 5.5"w x 3.5"d x 1.25"h
- Input Impedance: 1k
- Output Impedance: 100 ohms RCA
- Frequency Response: 3Hz to 31kHz
- THD: .003% @ 1KHz
- S/N Ratio: >100 dB unweighted
- Size: 5.5"w x 3.5"d x 1.25"h
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer