Rolls MX34C LiveMix

No longer available at zZounds

zZounds Gear Experts Say...

Mix two XLR mic channels to stereo with this easy-to-operate mixer. Powered by a 9V battery, the portable MX34C is ideal for mixing audio to a video camera.

Overview

Introducing the Rolls MX34c LiveMix two channel microphone mixer. Although having many uses, this little mixer was originally designed with the video camera operator in mind.

The MX34c is a two channel microphone mixer with balanced XLR inputs, phantom power, and stereo 1/8" (3.5mm) outputs. The 3.5mm output may be switched either mic or line level. It has a stereo 1/8" (3.5mm) auxiliary input for connection to any stereo line-level source, and a 3.5mm headset mic-in on the front for narration, etc.

Each channel has a Level and Pan control, and a separate headphone circuit allows for monitoring all signals without affecting the main output signal. Holes for a shoulder strap, easy-access controls, and smart Input/output jack placement make the MX34c ideal for the live recording enthusiast. The 9 volt alkaline batteries ensure adequate signal strength as well as phantom power for your favorite condenser microphone.

Features:

- 9V Battery or AC adapter operation
- 2 Mic Inputs
- +18VDC Phantom Power
- 3.5mm Stereo Output
- 3.5mm Stereo Headphone Output
- Pan control on each channel
- Auxiliary 3.5mm Input
- 3.5mm mic in jack for headset or other mic

Specs

- Input Impedance: Mic - 600 Ohms or greater (XLR), Aux - 47K stereo (3.5mm)
- Output Impedance: 50 Ohms
- THD + Noise: 0.02%
- S/N Ratio: 110 dB
- Frequency Response: 20 Hz - 30 kHz (+0 / -1 dB)
- Max Output Level: + 14 dB
- Max Input Level: +20 dB
- Max Gain: +70 dB
- Batteries: 2 X 9V Alkaline
- Current Draw: 30 mA
- Phantom Power: +18 VDC
- Input Connectors: 2 Female XLR, 1/8" (3.5mm)
- Output connectors: 3.5mm Stereo Main Out, 3.5mm Headphone
- DC Power Jack: (5.5mm X 2.1mm Tip Negative)
- Dimensions: (W x D x H) 6.3 x 3.7 x 1.4"
- Weight: 1 lb