Positive Grid Spark CAB 2 Powered FRFR Speaker Cabinet (140 Watts)
zZounds Gear Experts Say...
Grow your Spark into a roaring rig! Spark CAB 2 pushes 140 watts through a 10" woofer and two 1" tweeters for uncolored sound that responds to your touch.
Overview
The Positive Grid Spark CAB 2 is the rig expander for Spark -- turn any Spark amp into a full rig with 140 watts of clean, full-range power. Redesigned inside and out with re-tuned acoustics and an upgraded signal path, it delivers robust volume and clarity. Also use it as a full-range cab for any line-level modeler, pedal, or amp you already play.
Turn up. Way up. Spark CAB 2 adds 140 watts of clean, full-range power to any Spark amp. Redesigned inside and out, it delivers the volume and clarity for home, rehearsal, and the stage -- and works just as well with any other rig.
Connect your Spark. Or plug in your rig. At home, on stage, or in the studio, Spark CAB 2 takes your Spark through a dedicated input and opens up to everything else you play, from modelers and floorboards to amp sims and any line-level source.
Hear it. Send it. Send Spark CAB 2's sound to the front of house through its balanced XLR output, and use it on stage as your personal monitor at the same time. With independent volume controls, you set what you hear and what the room hears separately.
- Turn any Spark amp into a full rig with detail and clarity
- Re-tuned acoustics and an upgraded signal path for room-filling sound
- Powers and charges the whole Spark amp family from a single outlet
- Independent volume, Speaker Volume for cabinet and Line Out Volume for the output
- 10" woofer and two 1" tweeters, full and clear from the low… read more end to the top
- Input Selector switches between 3.5 mm Spark Input and 2 mono XLR/TRS Combo Inputs
- Contour Switch boosts low and high frequencies to improve balance at low volumes
- Road-ready solid wood cabinet with recessed side handles and a tidy cable tie
- Quick Start Guide
- AC Power Cord
- DC Power Cable
- DC Power Cable Adapter for Spark 2
- 3.5 mm Audio Stereo Cable
read less
Turn up. Way up. Spark CAB 2 adds 140 watts of clean, full-range power to any Spark amp. Redesigned inside and out, it delivers the volume and clarity for home, rehearsal, and the stage -- and works just as well with any other rig.
Connect your Spark. Or plug in your rig. At home, on stage, or in the studio, Spark CAB 2 takes your Spark through a dedicated input and opens up to everything else you play, from modelers and floorboards to amp sims and any line-level source.
Hear it. Send it. Send Spark CAB 2's sound to the front of house through its balanced XLR output, and use it on stage as your personal monitor at the same time. With independent volume controls, you set what you hear and what the room hears separately.
Features:
- A 140 W powered FRFR cabinet design matched for Spark 2- Turn any Spark amp into a full rig with detail and clarity
- Re-tuned acoustics and an upgraded signal path for room-filling sound
- Powers and charges the whole Spark amp family from a single outlet
- Independent volume, Speaker Volume for cabinet and Line Out Volume for the output
- 10" woofer and two 1" tweeters, full and clear from the low… read more end to the top
- Input Selector switches between 3.5 mm Spark Input and 2 mono XLR/TRS Combo Inputs
- Contour Switch boosts low and high frequencies to improve balance at low volumes
- Road-ready solid wood cabinet with recessed side handles and a tidy cable tie
Box Contents:
- Spark CAB 2- Quick Start Guide
- AC Power Cord
- DC Power Cable
- DC Power Cable Adapter for Spark 2
- 3.5 mm Audio Stereo Cable
Specs
AUDIO
- Frequency Range:
- 45-20,000 Hz
- Stereo/Mono:
- MONO
- Max. Sound Pressure Level (SPL):
- 118 dB (RMS), 121 dB (Peak)
- Cabinet Principle:
- Bass Reflex
- Speakers:
- 1x10-inch woofer, 2x1-inch tweeter
- Impedance:
- 4 ohms
POWER
- Main Input Power:
- AC 100-240 V
- Power Amplifiers:
- 140 W (RMS), 400 W (Peak) Class D
- DC Power Input (For Spark 2 & Spark 40):
- DC 20 V/2.5 A
- USB-C Power Input (For Spark MINI, GO & PEDAL):
- DC 5 V/2 A
WIRED CONNECTIVITY
- Spark Amp Input:
- 1 x 3.5 mm stereo
- Standard Input:
- 2 x mono XLR/TRS combo inputs
- Output:
- 1 x mono XLR balanced
PHYSICAL UNIT
- Controls:
-
- Input Selector
- Speaker Volume
- Line Out Volume
- Ground Lift Switch
- Contour Switch
- Dimensions (with rubber feet):
-
- 492.5 x 399.8 x 255 mm
- 19.39 x 15.74 x 10.04 in
- Weight:
-
- 13.5 kg
- 29.76 lbs
- Grille Cloth:
- Woven
- Handle:
- 2 recessed speaker handles on the sides
- Cable Tie:
- 1 adjustable cable tie for fixing instrument and audio cables on the back
Dimensions and Weight in Packaging
Black
- Shipping Weight: 34.25 lbs
- Shipping Dimensions: 24 x 18 x 13 in
- Manufacturer Part Number (MPN): SE021M-USSSS
Pearl
- Shipping Weight: 34.05 lbs
- Shipping Dimensions: 25 x 18 x 13 in
- Manufacturer Part Number (MPN): SE022M-USSSS
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Web: https://help.positivegrid.com/hc/en-us
Web: https://help.positivegrid.com/hc/en-us
Black
$399.00
- 8 payments of$49.88/moINTEREST-FREE
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.