The Peavey PVXp 15 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2-3/8-inch voice coil and 50-ounce magnet, and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn.


Get a one-minute overview of everything you get with Peavey's PVXp Bluetooth series speakers:


The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4-inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector.

Features:

- Two-way bi-amped sound reinforcement enclosure
- RX14 compression driver, with 1.4 inch titanium diaphragm
- Reliable fan-cooled power amps with DSP protection
- Total of 980W peak dynamic… read more power
- DSP control for precise crossover, EQ, and limiting functions
- Bluetooth input is via a dedicated input channel
- Mix/Thru Output is via a male XLR jack
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Top, bottom, and right side flying point inserts
- Full-coverage, heavy-duty perforated steel grilles with powder-coat finish
- Heavy-duty woofer
- DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision
- Peavey’s Quadratic Throat Waveguide technology, 100 by 50 degree coverage
- Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
- Analog input is via a combo female XLR and 1/4” TRS phone jack with balanced input
- Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8” jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
- Pole mount molded-in for 1 3/8” diameter poles

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

read less