Mojave Audio MA-301 FET Multi-Pattern Large-Diaphragm Condenser Microphone

Record vocals, drums, guitar cabs and more! This uber-versatile mic gets its FET pedigree from the Mojave MA-201, and its multiple patterns from the MA-300.

Overview

The MA-301VG is a multi-pattern large diaphragm, solid-state condenser microphone. Based upon the popular MA-201VG designed by David Royer, the MA-301VG adds a 3-position pickup pattern selector, a 15dB pad and a switchable bass roll-off.

Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resistors, the MA-301VG performs at a level reminiscent of some of the best loved classic condenser microphones. Each MA-301VG microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shockmount.

Specs

Transducer Type: Externally polarized, pressure gradient capacitor - double diaphragm.
Diaphragm: 1-inch diameter, gold sputtered
Diaphragm Thickness: 3 microns
Polar Pattern: 3 patterns; omni, cardioid and figure-8
Frequency Response: 20 Hz to 20 KHZ, +/-3 dB at "flat" setting of bass cut switch. Bass cut switch provides 6 dB per octave attenuation below 100 Hertz in "cut" setting
Sensitivity: -40.5 dB, re. 1V/pa
Maximum SPL: 120 dB with pad off, 135 dB with pad on.
Distortion: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off
< 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on
Self Noise: 14dB nominal, not to exceed 16dB (A weighted)
Pad: 15 dB
Bass Cut: 6 dB per octave below 100 hertz.
Impedance: 550 ohms, transformer balanced (Jensen)
Powering: 48VDC phantom power; current 1.2 mA
Dimensions and Weight:
Carrying case with microphone, shock mount: 10" x 9" x 4.5", 4 lbs.
Microphone: 7 5/8" X 2" (194mm x 51mm), 1 lb. (0.45Kg)

Dimensions and Weight in Packaging
Vintage Gray, MA-301VG: Shipping Weight: 6 lbs; Shipping Dimensions: 13 x 13 x 7 in; Manufacturer Part Number (MPN): MA=301fetVGT