Mesa/Boogie 2x15 Subway Vertical Bass Ultra-Lite Speaker Cabinet (800 Watts, 2x15")

zZounds Gear Experts Say...

Design excellence meets portability in this tour-ready Mesa/Boogie Subway Ultra-Lite bass cabinet, loaded with two vertically stacked 15" neodymium speakers.

Overview

Mesa's passion for design, excellence, and portability meets the demand for great tone in a simple, accessible package. The next chapter in the MESA/Boogie bass story awaits! Handcrafted in Petaluma, California, Mesa's lightweight Italian poplar cabinets are tuned and loaded with custom Subway speakers.

Features:

- Designed & Handcrafted in Petaluma, California
- Tuned Front Ported Tri-Port Porting with Aviation style bracing for superior strength/reduced weight
- Lightweight Italian Poplar Cabinets -- Legendary Mesa Quality Construction
- Custom Subway Neodymium Speakers & High Frequency Horn with Premium Attenuator
- Combination speakON & 1/4" Input and Parallel Output
- Recessed, Flip-Out Metal Handles
- Black Bronco Vinyl with Black Metal Grille
- Lexan Corners
- Slip Cover

Specs

- Cabinet Material: Light-Weight Italian Poplar
- Finish: Black Bronco
- Corner Material: Lexan
- Style/Type: Tuned Front Ported Tri-Porting (2 x 4.85" square x 4.5" deep / port area = 48.0 sq. in.)
- Cabinet Internal Volume: 5.44 CF
- Speaker(s) & Mounting Position: Subway Neodymium Speakers / Front Mounted
- High Frequency Horn: Yes
- Horn Control: Premium Attenuator
- Input/Output Connectors (speakON Connectors wired 1+/1-): 2 x speakON-1/4" (NL-4 combo)
- Nominal Impedance (Average impedance normalized up to standard value): 4 ohms (only)
- Minimum Impedance @ Frequency (Minimum cabinet impedance value from 20Hz - 5kHz): 3.41 ohms (@ 40.9Hz)
- Average Sensitivity (RMS) 50Hz-1000Hz (Average sensitivity based on an RMS signal from 50Hz - 5kHz): 100.4dB/1W/1M
- Maximum SPL - 50Hz-1000Hz (Maximum SPL calculated from average sensitivity and maximum RMS input power): 129.5dB/1M
- Average Thermal Power (RMS) 50Hz-1000Hz (Power rating ("RMS") of L.F. driver based on EIA RS-426A standard): 800 Watts
- Average Mechanical Power (RMS) 50Hz-1000Hz (Average power rating ("RMS") based on average safe cone excursion): 800 Watts
- Minimum Mechanical Power (RMS) @ Frequency (Power rating ("RMS") based on point of maximum safe cone excursion): 800 Watts (@ 68.0Hz)
- Low Freq F3 (Hz) (-3dB point of the LF response below the average response): 57.2Hz
- Low Freq F6 (Hz) (-6dB point of the LF response below the average response): 47.2Hz
- Low Freq F10 (Hz) (-10dB point of the LF response below the average response): 38.6Hz
- High Freq Response (Nominal HF response, dependent on the position of HF attenuator): >12kHz
- Transport Assistance: Included - Built-in Tilt & Roll Transport System with Rear Glide Rails
- Slip Cover: Included - Fitted Slip Cover
- Size: 34 3/8" x 19 1/4" x 19 1/2"
- Weight: 60 lbs

Dimensions and Weight in Packaging
Black Bronco: Shipping Weight: 75.35 lbs; Shipping Dimensions: 38 x 24 x 24 in; Manufacturer Part Number (MPN): 0.S215.AMB