Ibanez RG1550ML Prestige Left-Handed Electric Guitar (with Case)
No longer available at zZounds

zZounds Gear Experts Say...
With a double cutaway design and DiMarzio, Air Norton, True Velvet, and Tone Zone pickups, this guitar was made for left-handed shredders.
Overview
As the RG Prestige history continues to be written, players have demanded new specs, new finishes and new thrills. In 2009, Ibanez has responded with a host of new models. These guitars are all made in Japan by our finest luthiers and have the fast, flat Prestige necks, drop-dead good looks and double-locking trems, plus new finishes, maple fretboards and new pickup configurations featuring DiMarzio(R) Air Norton(TM), True Velvet(TM) and Tone Zone(R) pickups. The Ibanez RG1550ML is a left-handed version of the highly regarded Ibanez RG1550M, offering lefty players the utmost in playability and tone.
Features
The RG1550M features a 5-piece maple/walnut Wizard Prestige neck with maple fretboard.
Back view of the RG1570's 5-piece maple/walnut Wizard Prestige neck.
The RG1570/RG1550M can dial in any tone, from crystal clear to searing and nasty, thanks to its V7 neck pickup, S1 middle pickup and V8 bridge pickup combination.
Edge Pro Tremolo
In the last two decades, no other guitar maker besides Ibanez has done so much to advance the art and science of the tremolo. The Edge-PRO represents the next phase in locking tremolos.
To avoid the problem of string holder blocks getting lost during string changes, the Edge-PRO's sliding string holders are actually part of the bridge and won't drop from the saddle unit.
With the Edge-PRO design, there's no need to cut off the ball end of your strings when installing new strings.
The Edge-PRO features a unique Sound Metal Chip on… read more each saddle which helps increase sustain right at the most critical area, the intonation point. read less
Features
The RG1550M features a 5-piece maple/walnut Wizard Prestige neck with maple fretboard.
Back view of the RG1570's 5-piece maple/walnut Wizard Prestige neck.
The RG1570/RG1550M can dial in any tone, from crystal clear to searing and nasty, thanks to its V7 neck pickup, S1 middle pickup and V8 bridge pickup combination.
Edge Pro Tremolo
In the last two decades, no other guitar maker besides Ibanez has done so much to advance the art and science of the tremolo. The Edge-PRO represents the next phase in locking tremolos.
To avoid the problem of string holder blocks getting lost during string changes, the Edge-PRO's sliding string holders are actually part of the bridge and won't drop from the saddle unit.
With the Edge-PRO design, there's no need to cut off the ball end of your strings when installing new strings.
The Edge-PRO features a unique Sound Metal Chip on… read more each saddle which helps increase sustain right at the most critical area, the intonation point. read less
Specs
Specifications
Neck Material: 5pc Maple/ Walnut
Neck Type: Wizard Prestige
Body: Basswood body
Frets: Jumbo frets
Fingerboard: Maple
Inlay: Black dot inlay
Bridge: Edge Pro bridge
NeckPU: V7
MiddlePU: S1
BridgePU: V8
HW Color: CK
Finishes: PPN, PBL
Neck
Scale/Length: 648mm/25.5 in.
a: Width at Nut 43mm
b: Width Last Fret 58mm
c: Thickness 1st Fret 18mm
d: Thickness 12th Fret 20mm
Radius: 430mm
Pickups
Bridge Pickup
Name: VINTAGE 8
Model No: V8
Construction: Humbucking
Magnet: Alnico
Description: Warm yet articulate lead pickup with enhanced overtones. Good harmonics without excessive brightness.
Middle Pickup
Name: SINGLE 1
Model No: S1
Construction: Single Coil
Magnet: Alnico
Description: Traditional-sounding yet high output single coil with Alnico-5 polepieces for even string output. Designed to work with humbuckers in the split position.
Neck Pickup
Name: VINTAGE 7
Model No: V7
Construction: Humbucking
Magnet: Ceramic
Description: Tight, but bright. Very dynamic for chording and rhythm.
Neck Material: 5pc Maple/ Walnut
Neck Type: Wizard Prestige
Body: Basswood body
Frets: Jumbo frets
Fingerboard: Maple
Inlay: Black dot inlay
Bridge: Edge Pro bridge
NeckPU: V7
MiddlePU: S1
BridgePU: V8
HW Color: CK
Finishes: PPN, PBL
Neck
Scale/Length: 648mm/25.5 in.
a: Width at Nut 43mm
b: Width Last Fret 58mm
c: Thickness 1st Fret 18mm
d: Thickness 12th Fret 20mm
Radius: 430mm
Pickups
Bridge Pickup
Name: VINTAGE 8
Model No: V8
Construction: Humbucking
Magnet: Alnico
Description: Warm yet articulate lead pickup with enhanced overtones. Good harmonics without excessive brightness.
Middle Pickup
Name: SINGLE 1
Model No: S1
Construction: Single Coil
Magnet: Alnico
Description: Traditional-sounding yet high output single coil with Alnico-5 polepieces for even string output. Designed to work with humbuckers in the split position.
Neck Pickup
Name: VINTAGE 7
Model No: V7
Construction: Humbucking
Magnet: Ceramic
Description: Tight, but bright. Very dynamic for chording and rhythm.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-669-8262
Web: https://www.ibanez.com/usa/support/
Phone: 800-669-8262
Web: https://www.ibanez.com/usa/support/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.