Genzler Bass Array 210-3 Bass Speaker Cabinet (500 Watts, 2x10")

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Genzler Bass Array 210-3 Bass Speaker Cabinet (500 Watts, 2x10"), Action Position Back
Genzler Bass Array 210-3 Bass Speaker Cabinet (500 Watts, 2x10"), ve
Genzler Bass Array 210-3 Bass Speaker Cabinet (500 Watts, 2x10"), Action Position Back Genzler Bass Array 210-3 Bass Speaker Cabinet (500 Watts, 2x10"), ve
Combining the punchy sound of two 10" woofers with the modern clarity of Genzler's Bass Array system, the BA-210 helps produce a full, professional tone.

The Genzler BA210 v3 is an extremely lightweight (38 lbs.) 500-watt, 8-ohm cabinet, offering those players who gravitate to the response of 10” drivers a more full-bodied, defined, musically smooth and seamless cabinet choice.

The benefits of this design platform are exponential for the player:

- Delivering full, deep, low frequency response from the high efficiency dual 10” woofers — doing what they do best, providing excellent support of the fundamental for the lower strings of the instrument
- Using a selective crossover point this design overcomes the “beaming” (pattern narrowing) effects of a full range signal being reproduced by larger low frequency drivers which is common in many current small cabinet designs
- Lowering midrange and high frequency distortion by allowing the use of small, 3” high performance cone transducers that would otherwise be unsuitable without the increased acoustic sensitivity obtained by the array design
- Providing a much more open, smoother midrange and high frequency response because of the ideal natural characteristics of the mid-high frequency array when compared to a conventional tweeter, which cannot reproduce the crucial midrange frequencies without pattern control or un-natural distortion

- Power Handling: 500 Watts
- Frequency Response: 45-15K Hz
- Sensitivity 1W/1M: 99 dB
- Nominal Imp.: 8 Ohms
- Crossover Freq.: 800 Hz
- Weight Lbs.: 38
- Dimensions (H x W x D): 16” x 23” x 18”

Speaker components:
- Two: Premium Faital neodymium 10” cast frame loudspeakers utilizing a unique dual-wound voice coil design for increased power handling and efficiency.
- Four: Premium Faital neodymium 3” mid/high cone drivers loaded into a sealed line array stack.

Input panel/crossover network:
Custom designed 6 dB/octave slopes in balance with the acoustical controls of each enclosure.
Two — Speakon NL-2 connector and two – ¼” sealed jacks; to reduce rear cabinet air loss and noise.

Cabinet construction:
Light-weight, multi-layer, plywood construction
Heavy-duty textured black vinyl.
Black metal corners and heavy-duty metal recessed handles.
Custom, curved grille with a unique center “pleat” to protect the array column.
Large rubber feet.

For support or warranty questions, please contact the manufacturer:
Email: technicalsupport@genzleramps.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer