Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back
Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back
Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back
Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back Genzler BA15-3 SLT Bass Array Speaker Cabinet (400 Watts), Action Position Back
Ideal on its own or stacked, this Genzler bass cab delivers enormous low-frequency depth and fullness along with clarity, quickness, and full-range response.

The Genzler Amplification BA15-3 SLT is Genzler's entry into the 15" cabinet segment, offering all of the benefits of the Bass Array concept: huge low frequency depth and fullness, with the clarity, quickness and full-range response that the 4 x 3" line array element adds to this big-piston 15" driver.

Get an overview of this product by GENZLER:


As well, this 6 degree slanted cabinet further enhances all benefits of the BA design adding a level of dispersion and projection, either when being used as a single enclosure or in combination with additional straight or slant cabinets. This model is ideal on its own but can add so much more to stage output when stacked with other Bass Array models, as the BA210-3 or BA410-3 models.

Power Handling: 400 Watts
Frequency Response: 30 Hz - 15K Hz
Sensitivity 1w/1M: 99dB
Nominal Impedance: 8 ohms
Crossover Freq: 800 Hz
Weight: 35 lbs.
Dimensions (H x W x D): 17 1/2" x 23" x 19 3/8"

Speaker Components:
- Premium Faital neodymium 15" cast frame loudspeaker utilizing a unique dual-wound voice coil design for increased power handling and efficiency
- 4x premium Faital neodymium 3" mid/high cone drivers loaded into a sealed line array stack

Input Panel/Crossover Network:
- Custom designed 6 dB/octave slopes in balance with the acoustical controls of each enclosure
- 2x Speakon NL-2 connector and 2x 1/4" sealed jacks; to reduce rear cabinet air loss and noise.

Cabinet Finish:
- Heavy-duty textured black vinyl
- Black metal corners and side-mounted recessed handles
- Custom, curved grille with a unique center "pleat" to protect the array column
- Large rubber feet

For support or warranty questions, please contact the manufacturer:
Email: technicalsupport@genzleramps.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer