Galaxy Audio PSER/52HS Headset Microphone Wireless System

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Galaxy Audio PSER/52HS Headset Microphone Wireless System, Main
Galaxy Audio PSER/52HS Headset Microphone Wireless System, Main
Galaxy Audio PSER/52HS Headset Microphone Wireless System, Main Galaxy Audio PSER/52HS Headset Microphone Wireless System, Main
This affordable UHF wireless system includes a Galaxy Audio PSER receiver, MBP52 bodypack transmitter, HS-U3BK headworn microphone, and rackmount kit.

Part of the Galaxy Audio PSE wireless series, the PSER/52HS wireless system includes the PSER receiver, the MBP52 body-pack transmitter, the HS-U3BK headset microphone, antennas, 1/4" to 1/4" cable, power supply, rack ears, and screws.

The PSER multi-channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSER is a UHF diversity receiver with 16 selectable channels.

The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

Features:

- 300' Range
- 16 Selectable UHF Frequencies
- Diversity Antennas
- Single/Dual Rack Mount Included
- Output Volume Control
- IR Sync Receiver to Transmitter
- AF Level Indicator
- Active Antenna Indicator
- Squelch Adjustment
- XLR / 1/4" Outputs
- Detachable BNC Antennas
- Metal Chassis

Audio Output Level: (+/-30 kHz deviation, 1 kHz tone)
XLR Connector (into 600 Ohms load): -12 dBV
1/4" Connector (into 3 k Ohms load): -18 dBV
Output Connections:
1 Male XLR Balanced
1/4" Balanced
Output Impedance: XLR connector 200 Ohms
1/4" connector: 1 k Ohms
XLR Output: Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity: -93 dBm for 30 dB
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1 U
Dimensions: 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm)
Weight: 31 oz (880 g)
Power Requirements: 12-18 V DC at 300 mA, supplied by external power supply

For support or warranty questions, please contact the manufacturer:
Phone: 800-369-7768 x101
Email: service@galaxyaudio.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer