Fender The Bends Compressor V2 Effect Pedal
zZounds Gear Experts Say...
Fender's The Bends Compressor V2 packs modern and vintage voicings plus a clean blend and boost for smooth, transparent squeeze for guitar and bass alike.
Overview
An intuitive compressor/boost combo offering low-noise compression in both modern and vintage tube flavors, The Bends V2 by Fender is ideal for guitar and bass alike. Utilizing a unique take on OTA technology for real-time gain control, this compressor reacts to your playing dynamics smoothly and naturally to balance the volume of louder and quieter sections while adding sustain and thickness to your notes.
The Bends V2 simplifies compression to three clearly labeled controls -- a three-speed Attack switch, a fine-tuned Release control, and an Input control which sets the input level of the compression trigger. An active Tone control with a center detent cuts or boosts treble to make up for any lost sparkle, and the Blend control injects clean into the mix to provide the perfect balance of clean dynamics and compression. A rear-mounted Vintage switch provides the real secret sauce, reshaping the circuit from a crisp, surgical action to a beautifully colored smooth compression with a hint of natural saturation when engaged.
Combine boost and compression for some real magic. The Comp Pre/Post switch rearranges the internal circuit to reorder the independent ultra-clean boost and compression. Place the boost before compression for soaring Nashville-style sustain or stack the boost after your signal is compressed and kick it on for a solo boost to increase the overall output level into your next effects.
Featuring an independent boost circuit, switchable buffered and true bypass… read more modes, and multiswitch enabled footswitches for momentary and latching activation, the Bends V2 is a fully featured compressor that brings natural feeling dynamic control to any instrument.
- Blend control injects the natural dynamics of your playing back into the mix for the perfect balance of level output and natural feel
- Independently switchable, ultra-clean boost can be placed before or after compression
- Rear panel Multiswitch enables latching (tap) and momentary (press-and-hold) footswitch action
- Rear panel true or buffered bypass switch, with relay based auto-bypass when no power is present
- Top mounted jacks and road-ready aluminum enclosure
- Powered by 9V Center Negative AC Adaptor, Not Included
read less
The Bends V2 simplifies compression to three clearly labeled controls -- a three-speed Attack switch, a fine-tuned Release control, and an Input control which sets the input level of the compression trigger. An active Tone control with a center detent cuts or boosts treble to make up for any lost sparkle, and the Blend control injects clean into the mix to provide the perfect balance of clean dynamics and compression. A rear-mounted Vintage switch provides the real secret sauce, reshaping the circuit from a crisp, surgical action to a beautifully colored smooth compression with a hint of natural saturation when engaged.
Combine boost and compression for some real magic. The Comp Pre/Post switch rearranges the internal circuit to reorder the independent ultra-clean boost and compression. Place the boost before compression for soaring Nashville-style sustain or stack the boost after your signal is compressed and kick it on for a solo boost to increase the overall output level into your next effects.
Featuring an independent boost circuit, switchable buffered and true bypass… read more modes, and multiswitch enabled footswitches for momentary and latching activation, the Bends V2 is a fully featured compressor that brings natural feeling dynamic control to any instrument.
Features:
- Analog compression circuit optimized for low noise performance with selectable vintage character- Blend control injects the natural dynamics of your playing back into the mix for the perfect balance of level output and natural feel
- Independently switchable, ultra-clean boost can be placed before or after compression
- Rear panel Multiswitch enables latching (tap) and momentary (press-and-hold) footswitch action
- Rear panel true or buffered bypass switch, with relay based auto-bypass when no power is present
- Top mounted jacks and road-ready aluminum enclosure
- Powered by 9V Center Negative AC Adaptor, Not Included
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Series: Fender Pedals
- Model Name: The Bends Compressor V2
- Material: Anodized Aluminum
- Color: Black
- Compressor Controls: Compressor Level, Blend, Input, Release, Tone, Attack Switch, Comp Position Switch, Vintage Switch; Boost Control
- Back Panel Controls: Buffered Bypass Switch, Multiswitch
- Footswitch: Footswitch 1: Compression On/Off, Footswitch 2: Boost On/Off
- Control Knobs: Black Knurled
- Impedances: Input: 1M ohm Output: 470 ohm
- Power Supply: 280mA min @ 9VDC regulated adapter 5.5 x 2.1mm barrel connector (not included)
- Power Requirements: 9VDC
- Dimensions: 2.44" x 4.4" x 2.2" (62mm x 111.8mm x 55.9mm)
- Weight: 0.83 lbs. (0.38kg)
- Model Name: The Bends Compressor V2
- Material: Anodized Aluminum
- Color: Black
- Compressor Controls: Compressor Level, Blend, Input, Release, Tone, Attack Switch, Comp Position Switch, Vintage Switch; Boost Control
- Back Panel Controls: Buffered Bypass Switch, Multiswitch
- Footswitch: Footswitch 1: Compression On/Off, Footswitch 2: Boost On/Off
- Control Knobs: Black Knurled
- Impedances: Input: 1M ohm Output: 470 ohm
- Power Supply: 280mA min @ 9VDC regulated adapter 5.5 x 2.1mm barrel connector (not included)
- Power Requirements: 9VDC
- Dimensions: 2.44" x 4.4" x 2.2" (62mm x 111.8mm x 55.9mm)
- Weight: 0.83 lbs. (0.38kg)
Dimensions and Weight in Packaging
Base Item
- Shipping Weight: 1.06 lbs
- Shipping Dimensions: 6 x 4 x 3 in
- Manufacturer Part Number (MPN): 0234531050
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-488-1818
Web: https://my.fender.com/support
Phone: 800-488-1818
Web: https://my.fender.com/support
New
$229.99
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.