Dynaudio BM12 mkIII Active Near-Field Monitor

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Dynaudio BM12 mkIII Active Near-Field Monitor, Main
Dynaudio BM12 mkIII Active Near-Field Monitor, Angle
Dynaudio BM12 mkIII Active Near-Field Monitor, Rear
Dynaudio BM12 mkIII Active Near-Field Monitor, Main Dynaudio BM12 mkIII Active Near-Field Monitor, Angle Dynaudio BM12 mkIII Active Near-Field Monitor, Rear
zZounds Gear Experts Say...
Mix confidently with accurate monitoring! With 8" woofers and 150 bi-amplified watts, Dynaudio BM12s are punchy and powerful enough to be mid-field monitors.

The Dynaudio BM12 mkIII expands on the legacy of the classic BM12A design. Re-voiced around Dynaudio's next generation waveguide, the BM12 mkIII has been designed around highly efficient hand-crafted neodymium drivers, providing faithful transient response and an SPL of 123 dB for larger listening environments.

Features:

- 123dB SPL peak power output
- Frequency response of 38Hz-21kHz
- Extended bass with BM14S II precision subwoofer
- HF, MF, LF analog room filters allow flexible positioning
- High pass filters at 60/80Hz for perfect subwoofer adaption
- Input sensitivity switch (-10/+4dB range)
- Extended excursion 8" woofer with pure aluminum voice coil
- 1.1" soft dome tweeter with pure aluminum voice coil
- 100W LF and 50W HF Class AB amplifier
- Made in Denmark

- Model: BM12 mkIII
- System: Two-way Active Nearfield Monitor
- Frequency Response: (+/- 3 dB) 38Hz - 21kHz
- Input level for 85 dB SPL @1m: 123 dB
- Power consumption: Idle: 15 W / Max: 130 W
- Amplifier power: Tweeter: 50 W / Woofer: 100 W
- Resonance Frequency: 40 Hz
- Bass Principle: Bass reflex
- Crossover Frequencies: 1500 Hz
- Crossover Slope: 6 dB/oct
- Tweeter: Esotec 28 mm/1.1" soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coil voice coil
- Woofer: 200 mm/8", One-piece molded poly-prop cone, 75 mm/3" kapton voice coil, Neodymium magnet
- Weight: 12.5 kg / 27.5 lbs
- Dimensions: (W x H x D) 234 x 369 x 328 mm / 9.2 x 14.6 x 12.9"

For support or warranty questions, please contact the manufacturer:
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer